What have you done to your Landie today.

The Mad Hat Man · Jul 21, 2013

refitted the rear bumper corners as they were about to fall off

.

danny6801 · Jul 21, 2013

Washed and polished the new paintwork ready for barnmouth holiday

SmileySteve · Jul 21, 2013

Racked with guilt...I did nothing..was stuff to do but I did none of it.....but fixed a wiring fault on my sons girlfriends, mothers Peugot....now thats made the guilt worse, even with the good deed

flat · Jul 21, 2013

took it to the tip absolutely loaded up with garden rubbish, then fixed my indicator that wasnt working. The other one packed up the other week to and i only just fixed that! Corroded wires suck

buckshot · Jul 21, 2013

managed to re-wire the solar panel to the old landy (after I had driven off with it still connected the other day ):doh:

Mickor · Jul 21, 2013

greased up and retightened wheel bearings
greased up front and rear propshafts

landowner · Jul 21, 2013

danny6801 said:
Washed and polished the new paintwork ready for barnmouth holiday

When you off mate, might call round for that crossmember if you still got it

DIFFLOCK66 · Jul 21, 2013

Enjoyed growling about the local roads with the straight through centre pipe fitted. Found an awesome rural road to off road/green lane on (permission via Lancs County Council

)
Bloody amazed at what a stock Disco 2 can do!

Diff.

chunkymunky · Jul 22, 2013

danny6801 said:
Hand rollered mine today but im a unsure on the colour what you guys think pic of it when started blue now some type of grey.

Me likey. Is that eastnor green or atlantic?

danny6801 · Jul 22, 2013

chunkymunky said:
Me likey. Is that eastnor green or atlantic?

It was just advertised as middle grey and thanks getting used to it now.

danny6801 · Jul 22, 2013

landowner said:
When you off mate, might call round for that crossmember if you still got it

Not till friday mate and still got it whenever your ready.

e4sanosh · Jul 22, 2013

Attempted to fit new radiator bottom hose and failed, lots of swearing.
Attempted to blank EGR and fit new top hose, failed, lots of swearing.
Gave up, booked it into my neighbours garage, went to pub.

timtheenchanteruk · Jul 22, 2013

appraised damage done this weekend, see yorkshire dales laning thread for pics, not too bad, nowt a hammer, block o wood n a bit of hammerite wont fix

lcbandit · Jul 22, 2013

Put some insa turbos on it

defender11069 · Jul 22, 2013

fit a nice new rad on me 90

MR BFG · Jul 22, 2013

Took her out to pick up the paint mix, no more odd coloured door!

andrewblueboy · Jul 22, 2013

heater blower only working on low setting,lucky enough i had spare switch in the shed.now all working as they should

.also while i had centre console out i thought i have a look at the bias plate as my gears are all over the place.turns out it was in two bits.so decided to weld it up

. jobs a goodern

andrewblueboy · Jul 22, 2013

heater blower only working on low setting,lucky enough i had spare switch in the shed.now all working as they should

.also while i had centre console out i thought i have a look at the bias plate as my gears are all over the place.turns out it was in two bits.so decided to weld it up

buckshot · Jul 22, 2013

re-soldered a bad connection on me start button on the old landy and finished off painting the rest of the roll cage

DIFFLOCK66 · Jul 22, 2013

Picked up 4 brand new Toyo Open Country A/T tyres for when the current set wear out

Diff.

What have you done to your Landie today.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Pensioner Pete

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

AKA Mr cool...

Active Member

Active Member

Attachments

Active Member

Well-Known Member

Well-Known Member

Similar threads