Dar ran Dar ran
Well-Known Member
- Posts
- 629
- Location
- Cumbria GB
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dar ran Dar ran
Well-Known Member
- Posts
- 629
- Location
- Cumbria GB
Not really we are down visiting family
More than sightseeing ( might have a go next summer)
Been to Bournemouth beach this morning
And going to a lake soon
But back up the road road tomorrow
Attachments
Dar ran Dar ran
Well-Known Member
- Posts
- 629
- Location
- Cumbria GB
All but a 1000m
Since Friday all well and really enjoyed the run out
Only one concern is the complete lack of Freelander 1 on the roads
I have noticed the decline in them for sale but this entire weekend I actually can only say I seen a
56 reg hse 5 door in that minging green
in a pub car park
And what looked like a clean original back facelift commercial parked up
On the side of a house near Ringwood ( if anyone knows it I am looking for a commercial)
not much of a heard of the MK2ās ether donāt think I seen 5 of them
Since Friday all well and really enjoyed the run out
Only one concern is the complete lack of Freelander 1 on the roads
I have noticed the decline in them for sale but this entire weekend I actually can only say I seen a
56 reg hse 5 door in that minging green
in a pub car park And what looked like a clean original back facelift commercial parked up
On the side of a house near Ringwood ( if anyone knows it I am looking for a commercial)
not much of a heard of the MK2ās ether donāt think I seen 5 of them
All but a 1000m
Since Friday all well and really enjoyed the run out
Only one concern is the complete lack of Freelander 1 on the roads
I have noticed the decline in them for sale but this entire weekend I actually can only say I seen a
56 reg hse 5 door in that minging green
And what looked like a clean original back facelift commercial parked up
On the side of a house near Ringwood ( if anyone knows it I am looking for a commercial)
not much of a heard of the MK2ās ether donāt think I seen 5 of them
Yes - sadly there are less and less of them on the road. Especially good working order ones
We have to look after themā¦
Dar ran Dar ran
Well-Known Member
- Posts
- 629
- Location
- Cumbria GB
Been on the one eye look for a commercial for past 6 years
Last 6 years but i think i should use both eyes now or that will never happen
They are definitely dwindling
Mine is a absolute pleasure and very very good underside so proper maintaining should keep her going till itās taxed to death and then parked up for my retirement
Been looking with one eye for a commercialYes - sadly there are less and less of them on the road. Especially good working order ones
We have to look after themā¦
Last 6 years but i think i should use both eyes now or that will never happen
They are definitely dwindling
Mine is a absolute pleasure and very very good underside so proper maintaining should keep her going till itās taxed to death and then parked up for my retirement
Ditto.Been on the one eye look for a commercial for past 6 years
Been looking with one eye for a commercial
Last 6 years but i think i should use both eyes now or that will never happen
They are definitely dwindling
Mine is a absolute pleasure and very very good underside so proper maintaining should keep her going till itās taxed to death and then parked up for my retirement
Very little (surface) rust showing on mine - and I have treated the underside, so well protected.
If looked after, they are great little cars and very capable off road too.
Iām a little undecided what to do with my F1. It breezed through its MOT last weekend, and is a joy, but Iāll not get much use in it this winter as Iāll be tinkering with my F2. My heart says to keep it, itās little Ā£Ā£Ā£, and he has his space on my drive.
Carlbrit
Member
- Posts
- 14
- Location
- Royal Wootton Bassett
Hi All,
Had mine on a decent code reader last night thanks to my neighbour.
The ask is can you please have a look at the data in the images and see if anything jumps out at you, are the readings ok/ concerning in any way? I'm thinking the fuel compensation is concerning for Injector 1 and 4 am I right in thinking that?
Is P1110 a common code what's the fix for that, we cleared it and it kept coming back.
Had mine on a decent code reader last night thanks to my neighbour.
The ask is can you please have a look at the data in the images and see if anything jumps out at you, are the readings ok/ concerning in any way? I'm thinking the fuel compensation is concerning for Injector 1 and 4 am I right in thinking that?
Is P1110 a common code what's the fix for that, we cleared it and it kept coming back.
Attachments
andyfreelandy
Well-Known Member
- Posts
- 5,602
- Location
- Devon
Checked tracking on a known good set up and one with tyre edge wear.
Bought one of these:
Very good device. Repeatedly fitted to known good car and all good and repeatable results.
Tyre wear vehicle was 20 degrees toe in too much.
Bought one of these:
Trackace Laser Wheel Alignment System Tracking Gauge Toe In Out Set Up | eBay
Accurate to 1' (0.0166 degree). ZigZag Truss. Race & Rally Acc's. Magnetic Camber Caster Gauge + Digital Tyre Pressure & Tyre Depth Gauges. Blackline Tools Digital Caster Camber Gauge With Mount & Magnet - SWE300.
www.ebay.co.uk
Very good device. Repeatedly fitted to known good car and all good and repeatable results.
Tyre wear vehicle was 20 degrees toe in too much.
kernowsvenski
Well-Known Member
- Posts
- 1,619
- Location
- Truro
They are thinning out quite a bit. I'm about to embark on a bit of a resto on mine with some help to hopefully keep it going a fair bit longerYes - sadly there are less and less of them on the road. Especially good working order ones
We have to look after themā¦
andyfreelandy
Well-Known Member
- Posts
- 5,602
- Location
- Devon
Always have 4 or 5 spare ones !
Another 10 years they will be worth sensible money. Buy up the low mileage ones now !!
Nice 50k 3 door on Marketplace. Metallic orange
!!
Another 10 years they will be worth sensible money. Buy up the low mileage ones now !!
Nice 50k 3 door on Marketplace. Metallic orange
!!New toy. Simple job first I thought - ease into the bigger stuff
So I thought Iād protect my bonce and replace the rear tailgate gas strutsā¦ the tailgate was struggling a little to fully extend smoothly.
Quick job - just unclip the old ones and clip new ones on, so popped out to the drive in between the rain.
Rushing, I forgot that when you take one old one off, the remaining strut will not be strong enough to hold the tailgate up. Luckily, I was stood under the tailgate at the time, so my head caught it and it didnāt slam down
So, my little job to protect my bonce actually hurt my bonce.
Still - all done now
So I thought Iād protect my bonce and replace the rear tailgate gas strutsā¦ the tailgate was struggling a little to fully extend smoothly.
Quick job - just unclip the old ones and clip new ones on, so popped out to the drive in between the rain.
Rushing, I forgot that when you take one old one off, the remaining strut will not be strong enough to hold the tailgate up. Luckily, I was stood under the tailgate at the time, so my head caught it and it didnāt slam down
So, my little job to protect my bonce actually hurt my bonce.
Still - all done now
Bounty
Well-Known Member
- Posts
- 260
- Location
- Cheshire, United Kingdom
It kept crying about low coolant so I fed it some as a treat
Which seems weird since I had it serviced at LR in August. Did they not look at it? It was below minimum
Which seems weird since I had it serviced at LR in August. Did they not look at it? It was below minimum
Hmmmā¦ Iād certainly keep an eye on it.
Sprayed PB Blaster over all the bolts relating to the removal of the rear sub frame and suspension arms next week.
Will give them another liberal coating on Tuesday.
Genuine LR propshaft flange bolts received and in the parts box ready.
And got a bigger jack and a larger set of axle stands. Much better now with a 4ā pad.
Will give them another liberal coating on Tuesday.
Genuine LR propshaft flange bolts received and in the parts box ready.
And got a bigger jack and a larger set of axle stands. Much better now with a 4ā pad.
Bounty
Well-Known Member
- Posts
- 260
- Location
- Cheshire, United Kingdom
We had a big day out, I needed 3 hours continuous running to update the maps in the navigation suite. Here's how that went;
Set off, started update. We'll need 02:47:00 to complete the update.
I'd read that if you turn the car off during this, you brick the navigation. So I got a bit nervous when It had been about 10 minutes and the "Updating..." % had been stuck at 0 for that time.
At about 15-20 minutes, it pranged up to 5%.
When it hit 80% it decided that the update was interrupted and to please re-insert the disk. I ejected my USB and plugged it straight back in, it resumed.
It got to 100% and said "Navigation Unavailable". Then it asked if I'd like to update the maps, and that it'd need 02:47:00 to do so!
I pressed cancel, got out and went for a walk around. Turned the car off before I went.
On getting back, I start it up, and it instead says "Version of maps in navigation is newer than the disk".
I ask for my route home and it takes me all the way back. Result!
Set off, started update. We'll need 02:47:00 to complete the update.
I'd read that if you turn the car off during this, you brick the navigation. So I got a bit nervous when It had been about 10 minutes and the "Updating..." % had been stuck at 0 for that time.
At about 15-20 minutes, it pranged up to 5%.
When it hit 80% it decided that the update was interrupted and to please re-insert the disk. I ejected my USB and plugged it straight back in, it resumed.
It got to 100% and said "Navigation Unavailable". Then it asked if I'd like to update the maps, and that it'd need 02:47:00 to do so!
I pressed cancel, got out and went for a walk around. Turned the car off before I went.
On getting back, I start it up, and it instead says "Version of maps in navigation is newer than the disk".
I ask for my route home and it takes me all the way back. Result!
kernowsvenski
Well-Known Member
- Posts
- 1,619
- Location
- Truro
Just priced up all the bits I'm about to buy. Eek
| Part | Qty | Total |
| Subframe bolt M14 x 106 | 4 | Ā£38.08 |
| Rear arms long bolt | 2 | Ā£19.10 |
| Rear arms long bolt nut | 2 | Ā£0.96 |
| Rear arm front bolt M12 x 75 | 2 | Ā£2.84 |
| Rear arm front nut | 2 | Ā£0.96 |
| Rear arm rear bolt M12 x 73 | 2 | Ā£2.84 |
| Rear arm rear nut | 2 | Ā£0.96 |
| Rear hub nut | 2 | Ā£3.40 |
| Front hub nut | 1 | Ā£1.70 |
| Propshaft lock washer | 2 | Ā£2.76 |
| Fuel tank cradle | 1 | Ā£79.95 |
| Fuel tank cradle screw M10 x 30 | 4 | Ā£4.80 |
| VCU bearing | 2 | Ā£107.98 |
| Brake cylinder | 2 | Ā£16.94 |
| Flexible hose | 2 | Ā£18.80 |
| LH brake pipe to cylinder | 1 | Ā£9.00 |
| RH brake pipe to cylinder | 1 | Ā£9.00 |
| Spring kit | 1 | Ā£25.00 |
| Window regulator | 1 | Ā£25.95 |
| Rear Diff | 1 | Ā£276.00 |
| VCU | 1 | Ā£216.00 |
| Total | Ā£863.02 |
But your F1 will love you even more
Similar threads
