What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Out with the old and in with the new. Rear door actuator replacement.
 

Attachments

  • IMG_4807.JPG
    IMG_4807.JPG
    305.3 KB · Views: 57
  • IMG_4809.JPG
    IMG_4809.JPG
    348.3 KB · Views: 58
  • IMG_4810.JPG
    IMG_4810.JPG
    347.6 KB · Views: 52
The air con regas process checks for leaks before it permits a regas. Don't want the halons in the atmosphere !!

So check compressor clutch is operating when you have engine running and press air con switch.

If not get the gas pressure rechecked as low pressure inhibits clutch.

Could also be an electrical or compressor fault.
 
andyfreelandy said:
The air con regas process checks for leaks before it permits a regas. Don't want the halons in the atmosphere !!

So check compressor clutch is operating when you have engine running and press air con switch.

If not get the gas pressure rechecked as low pressure inhibits clutch.

Could also be an electrical or compressor fault.
Click to expand...
Ya they couldn’t gas the boys Honda type R yesterday as it wasn’t holding pressure
That’s why I am surprised it’s gone off after working fine this morning
I will drop it off in the morning and see if it still as pressure
If it as I Will move from there
It’s definitely not clicking the clutch in as is
 
MaxTheDog1 said:
Atomician,
The pic you were asking for. As Alibro said there’s loads of space. 😊
View attachment 320969
Click to expand...
Thanks Max - that's very helpful... I had a look to see if it would pull off but it seemed pretty firm and as I wasn't sure which way it comes off I left it. The pic is useful on that too - knowing where the clips are and which way they point is v useful in getting them to pop out so cheers 🍻
 
Atomician said:
Thanks Max - that's very helpful... I had a look to see if it would pull off but it seemed pretty firm and as I wasn't sure which way it comes off I left it. The pic is useful on that too - knowing where the clips are and which way they point is v useful in getting them to pop out so cheers 🍻
Click to expand...
It's a Landrover, if it's meant to come off it doesn't and if it's meant to sty put it falls off.
 
MaxTheDog1 said:
Well it’s been torrential rain here (N. Yorkshire) all day so I got the gluing of headliner done. Not perfect but not bad for a first attempt. Kitchen implements used as weights for the magazine net shape. Not 100% successful…..
View attachment 321065View attachment 321064
Click to expand...
I'm thinking a couple of plastic bags filled with sand in each depression would be better
 
Anyone been able to find a suitable replacement for the roof netting? I’m waiting for the elastic as it did it’s last stretch along time ago but the netting will still be sagging. Cheers, M.
 
MaxTheDog1 said:
Anyone been able to find a suitable replacement for the roof netting? I’m waiting for the elastic as it did it’s last stretch along time ago but the netting will still be sagging. Cheers, M.
Click to expand...
Some originals on flea bay, but expensive.
Alternatively, bet you could easily knock something reasonable up from generic versions.
Not sure if Disco nets could work?

www.ebay.co.uk

FREELANDER 1 ROOF INTERIOR STORAGE NETS AND FIXINGS | eBay

HERE WE HAVE A FREELANDER 1 ROOF INTERIOR STORAGE NETS AND FIXINGS. WHEN YOU HAVE RECEIVED YOUR ITEM AND ARE SATISFIED WITH YOUR ITEM AND THE SERVICE YOU RECEIVED. ALL RUNNING OR NON-RUNNING VEHICLES BROUGHT.
www.ebay.co.uk

I have a couple of grey ones kicking around somewhere (net only), from an old donor.
 
Thanks Freddie17, seen them, and that one particularly. I’m thinking they’ll be in a similar state as mine. There’s also plenty of cargo netting to be had but the amount I need and the amount you have to buy doesn’t really make sense.
I tried sewing/haberdashery sites and the have some but it’s too fine and used for lining dresses, skirts and tutus!!
Cheers.
 
pranged it may '23 .. at a low speed.

may this year , sent it in for surgery.
bonnet, slam-panel, bumper, headlights, side panels .. replaced.
as was the cab control unit [ imobiliser etc ]
don't know what actualy killed that unit .. but it started misbehaving months before the accident.
front tortion bar , brake discs and drop links .. replaced.

radiator and intercooler survived impact .
[ 'twaz a metal bar on rear of a tipper truck ..
[ hit near top of bumper, then slid up 'n hit front of bonnet

hippo came home on tues. mot'd 'n taxed

this weekend i'll re-install an in-line thermostat.
[ that top hose got chewed up by one of the fans
[ as the fan unit got shoved back a bit .. a cm. or two.

and fit a new bonnet-deflector ..
www.4x4at.com

Land Rover Freelander L314 1997-2006 Dark Smoke Bonnet Guard

Manufactured specifically for the Land Rover Freelander Quick and simple to attach No drilling required Both strong and durable Made in New Zealand , high end product Buy direct...
www.4x4at.com www.4x4at.com
[ cuts down wind noise .. and good % of rain / snow deflected from hitting windcreen ]

and no doubt .. an oil/filter change .
........................
and big shout out to Simmonites in Thornton,
well done repairs .. and at a minimum cost to me.
from the very start .. when Mark [owner] came to transport hippo to hospital,
i felt confident all would be well :-}
.................
.
 
Last edited:
hd3 said:
pranged it may '23 .. at a low speed.

may this year , sent it in for surgery.
bonnet, slam-panel, bumper, headlights, side panels .. replaced.
as was the cab control unit [ imobiliser etc ]
don't know what actualy killed that unit .. but it started misbehaving months before the accident.
front tortion bar , brake discs and drop links .. replaced.

radiator and intercooler survived impact .
[ 'twaz a metal bar on rear of a tipper truck ..
[ hit near top of bumper, then slid up 'n hit front of bonnet

hippo came home on tues. mot'd 'n taxed

this weekend i'll re-install an in-line thermostat.
[ that top hose got chewed up by one of the fans
[ as the fan unit got shoved back a bit .. a cm. or two.

and fit a new bonnet-deflector ..
www.4x4at.com

Land Rover Freelander L314 1997-2006 Dark Smoke Bonnet Guard

Manufactured specifically for the Land Rover Freelander Quick and simple to attach No drilling required Both strong and durable Made in New Zealand , high end product Buy direct...
www.4x4at.com www.4x4at.com
[ cuts down wind noise .. and good % of rain / snow deflected from hitting windcreen ]

and no doubt .. an oil/filter change .
........................
and big shout out to Simmonites in Thornton,
well done repairs .. and at a minimum cost to me.
from the very start .. when Mark [owner] came to transport hippo to hostpital,
i felt confident all would be well :-}
.................
.
Click to expand...
You say that it was minimum cost to you, but that lot can't have been cheap.

Many a F1 would have been crushed for less. Well done for getting it all done up :D
 
  • Like
Reactions: hd3
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
655
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
244
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
722
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
627
Hippo
Hippo
Back
Top