Rank Amatuer
Well-Known Member
- Posts
- 4,878
- Location
- Scotland
Discs all round, one caliper, pads all round and a wheel bearing. Kerfuckingching!
Last edited:
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Did 400 miles, half of which was pulling just over a tonne !
Did 33.3 MPG on the M5 in heavy traffic.
Did 33.3 MPG on the M5 in heavy traffic.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
New project Andy?
Reckon there must be a fair bit over a tonne there, with the trailer?
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Yes Ali, always wanted one. RHD GT is out of my price range, but this wasn't. Not rusty but may convert and repair the few odd bits that need doing.
Can't find a forum for Cortina's like this one though!!
It is 818Kg apparently when dry. And it was raining!! Trailer must be 200 ish!?!
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Cortina weight is about right, my similar sized Avenger GT weights 850kgs.
However your trailer estimation is way off. A twin axle Ifor Williams (I can't tell what model), will weigh around 500kgs, smaller ones slightly less, larger slightly more.
Cortina looks lovely though.
Gosh! I know cars have put on a great deal of weight since those days, but a Cortina was never that small a car! I'd be surprised if it was much less than a ton (although I see Nodge has come up with a similar figure). Having weighed a couple of mine at work, I know manufacturers can be a bit "economical with the truth" on car weights
. I have a twin axle trailer (not a car transporter but a big dropside) that weighs 450 kg empty.
JimS
Well-Known Member
- Posts
- 10,715
- Location
- Not far enough away from London
Kerb weight on my Jensen-Healey is 1092kg and that is quite a small 2 seat convertible, so it is surprising how light some other old cars are
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Indeed, they are not full of crap that no one wants, has asked for or can repair themselves!!
Oh how twisted I have become!??
Oh how twisted I have become!??
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
So as not to bore the whatsits off the majority - the Cortina GT thread is now firmly embedded in 'Other Stuff' on this site.
Anyone in the slightest bit interested can follow https://www.landyzone.co.uk/land-rover/ford-cortina-mk-1-lhd-to-rhd.352756/page-4
Thanks for all the positive comments.
Anyone in the slightest bit interested can follow https://www.landyzone.co.uk/land-rover/ford-cortina-mk-1-lhd-to-rhd.352756/page-4
Thanks for all the positive comments.
kernowsvenski
Well-Known Member
- Posts
- 1,616
- Location
- Truro
Tested my VCU and discovered that it's okay but found a shot front bearing, and both rear trailing arm bushes to be well past their best. That would explain the knocking and bumping of my near side rear wheel on tight lock with power on, or over bumpy surfaces.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Trailing arms are pricey. You can change the Bush as usually the rubber has 'let go' and you can simply hacksaw almost all the way through the metal rim and then cold chisel it out. New ones fit with a vice and suitable size sockets.
Depends how wealthy one is!!???
Depends how wealthy one is!!???
kernowsvenski
Well-Known Member
- Posts
- 1,616
- Location
- Truro
I was wondering about poly as a possibility as it'll be the second time I've needed them doing. I wouldn't poly any others (other than the rear diff front, which I did a while ago).
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Poly come in 2 bits so easier to fit.
Not done it so dunno if it makes it harder or more vibes etc.
Put poly in engine mount stabiliser, soon took it out!!! Like driving a lawn mower.
Not done it so dunno if it makes it harder or more vibes etc.
Put poly in engine mount stabiliser, soon took it out!!! Like driving a lawn mower.
kernowsvenski
Well-Known Member
- Posts
- 1,616
- Location
- Truro
I might give them a go given the cost and relative ease of fitting/access. I can always swap them out if I'm not happy.
On another note, just ordered a set of G015s. Being fitted on sat. £450 lighter now.
- Posts
- 2,061
- Location
- Hertfordshire
Yeah good choice, I powerflexed mine fr. to rr. a couple of years back & the only problem I had was a squeak from the fr. lower arm bushes which I cured after fitting the std. type bushes/housing.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
G4 promotion vehicle has been used as a learner vehicle around the farm for my lad, 17 in 2 weeks!!
Wheel spin is a function of poor clutch control!!
Wheel spin is a function of poor clutch control!!
You're brave.
I didn't want to risk damage to my freelander the teaching my No1 daughter to drive and being automatic wouldn't have helped either, so I bought a cheap Citroën C3 to learn in.
Similar threads
