What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MOT't it.

clap5.gif
clap5.gif
clap5.gif
 
Hello everybody.
Today was a busy day for me. Firstly I have found seats from a 3 door and with £30( yes 30) in my pocket picked them up. Dark grey with tiger print on inserts. Really good condition. I do not need 5 seats at the moment and old interior will be cleaned and washed and put in the garage for better times. Swapped without a hassle. Also thanks to fleybay found virtually brand new window regulator with rails and motor for a massive £17 so now my driver window goes happily up and even down.
I am awaiting a delivery of a new clocks so hopefully they will work in my MY2000. it was a 99p with £3 p&p so even if they not work I am not massively out of pocket.
There is a few plans for her but not for now. Friendly chap I got seats from dstill have set of 15" steelies with AT hankook tires. All same depth and kind so maybe I will give him a wee bell and we can come to some agreement about the price.
Thanks and greetings from Scotland...
 
Nothing, as it has gone and I am missing it badly. The exit was faster than expected. Got a real hair dresser's car to deal with (MR2) then I should get a long term Freelander. Have a clear idea of what I would like, just need a suitable seller to co-operate.
 
Today I cleaned out the coolant header tank. A couple of months back, I noticed a small amount of black oil, accumulating around the top water mark.
This started forming after I'd done the thermostat mod.
I know the oil cooler has been replaced pretty recently, as it's less corroded than other engine components.
I've put this oil build up down to residue in the coolant, now able to migrate to the header tank, because of the increased coolant temperature.
20161113_113222.jpg


So I removed the header tank, cleaned out the black sludge.
I then refitted it, connected up the pipes and refilled with fresh OAT coolant.
20161113_120908.jpg
 
Last edited:
Nodge68 said:
Today I cleaned out the coolant header tank. A couple of months back, I noticed a small amount of black oil, accumulating around the top water mark.
This started forming after I'd done the thermostat mod.
I know the oil cooler has been replaced pretty recently, as it's less corroded than other engine components.
I've put this oil build up down to residue in the coolant, now able to migrate to the header tank, because of the increased coolant temperature.
View attachment 110604

So I removed the header tank, cleaned out the black sludge.
I then refitted it, connected up the pipes and refilled with fresh OAT coolant.
View attachment 110605
Click to expand...

That's quite a bit of oil, hope it is just a bit of migration.

Out of interest, stuck the synergy back on, tuning part only, no MAF. Setting 2, made Sod all difference!! That MAF cleaner made more difference. Will run it round for a bit to settle down and maybe turn it up a notch.
So today's lesson, clean your MAF, if you want a bit more boost:)
Mike
 
Skinny Mike said:
That's quite a bit of oil, hope it is just a bit of migration.

Out of interest, stuck the synergy back on, tuning part only, no MAF. Setting 2, made Sod all difference!! That MAF cleaner made more difference. Will run it round for a bit to settle down and maybe turn it up a notch.
So today's lesson, clean your MAF, if you want a bit more boost:)
Mike
Click to expand...
The oil quantity was probably no more then a teaspoonful. It has been building up ever since I did the thermostat mod. I'm not overly bothered as I know how long oil can take to get out of the cooling system.

My synergy is set to 8 with MAF compensation turned on. That makes a good difference to torque.
 
Decided not to fit a snorkel as they are too 'hair-dresser' and frankly - utterly pointless unless you like the pose value - they have absolutely no practical value on a freelander.. They are like wheel choices - you like the look or you don't - as for performance - they make no discernible difference - down to the user if they want it / them to add to their aesthetic choice and no more..

Also the poly-bushes were considered as an 'upgrade' but then totally dismissed as absolutely pointless an having a negative impact on overall 'package'. Hard to fit and simply awful to drive with and utterly no performance increase at all - nothing positive - only negative.

Took some time and Really decided to look at the larger wheels and tyres and it was obvious that this was not conducive to good performance from any freelander. without lowering the overall gear ratio - which would still be cr&p in reverse. :( - so, they were not considered any further as they would be a negative impact. Increased 'torque' from evry mods et al - not a chance of making a difference at such low rpm as needed for true off road use.
And then - onto - 'Wheel spacers' were then considered for a few milliseconds then also dismissed due to safety / legal concerns. - also - no benefit apart from aesthetic again.

I DID though - fit a high level brake light bulb which was far safer and more practical. :rolleyes:
The also a reverse light bulb.
Altogether, a very very productive day.
:D
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
655
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
245
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
722
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
627
Hippo
Hippo
Back
Top