What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Changed the front left hand side drop link for the anti roll bar
Mr Angle Grinder contributed nicely
No more knocking now
Did the same just before x-mas
Tempus Fugit
Well-Known Member
- Posts
- 17,692
- Location
- Great Britain
Got it MOT'd.
:clap2::clap2::clap2::clap2:
:clap2::clap2::clap2::clap2:
RealBeale
Active Member
- Posts
- 533
- Location
- Birmingham
Replaced the centre diff bush AGAIN !! This time with a polybush.
Brack
Well-Known Member
- Posts
- 1,635
- Location
- North East
Seem to have fixed my drivers door lock - it stopped unlocking on the remote the other day but locked fine ....I tried my spare remote on it this morning and it unlocked straight away... now the other remote works too - strange.
Last edited:
terr
Active Member
- Posts
- 319
- Location
- folkestone
fixed os rear window new motor and regulator £32 i think thats ok
thizzlemania91
Active Member
- Posts
- 241
Arctic2
Well-Known Member
- Posts
- 2,737
- Location
- Westmidlands
Fitted a larger battery than it came with in October when I purchased the FL 1
E44Varta Silver Heavy Duty Car Battery 77AH Type 096 includes 5 year warranty | eBay
E44Varta Silver Heavy Duty Car Battery 77AH Type 096 includes 5 year warranty | eBay
Attachments
Last edited:
htr
Well-Known Member
- Posts
- 1,556
- Location
- Central Otago, Southern New Zealand
Took off the front left drive shaft. Was impressed at how easily it popped out of the g'box housing. Replaced g'box side seal ready for reassembly when I get a replacement drive flange.
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
did it have the circlip fitted on the end of the driveshaft?
http://www.landyzone.co.uk/lz/attac...ar-drive-shaft-flinger-freelander-flinger.jpg
item 10.
Last edited:
htr
Well-Known Member
- Posts
- 1,556
- Location
- Central Otago, Southern New Zealand
It sure did! I lent over and reached down from above with two flat bladed screw drivers and hay presto...
On the down side I've accidentally ordered an IRD side seal [UNG100060L] and not the g'box one
What's the difference between TRX100060L and TRX100010L
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
It sure did! I lent over and reached down from above with two flat bladed screw drivers and hay presto...
On the down side I've accidentally ordered an IRD side seal [UNG100060L] and not the g'box one
no idea mate,sorry,but i am sure one of the freelander bods will tell you.
NeedleNose
Active Member
- Posts
- 227
- Location
- Plymouth Area
Maybe something stupid...
Just bought a set of 17" 6 spoke alloys (Freedom?) from the usual tat bazaar. From what I've read on here they should fit but stay tuned for questions about spacers...
Just bought a set of 17" 6 spoke alloys (Freedom?) from the usual tat bazaar. From what I've read on here they should fit but stay tuned for questions about spacers...
Briggsy1980
Member
- Posts
- 71
- Location
- Cheshire
Got the following fitted:
5 new Pirelli Scorpions (went the whole hog and got the spare done)
EBC grooved discs
Green stuff pads
Also had 4 wheel alinement done.
Expensive day but drives like a new car now and the brakes will hopefully last for years.
5 new Pirelli Scorpions (went the whole hog and got the spare done)
EBC grooved discs
Green stuff pads
Also had 4 wheel alinement done.
Expensive day but drives like a new car now and the brakes will hopefully last for years.
LandyMan
Well-Known Member
- Posts
- 1,184
- Location
- somewhere in the UK
I put on a set of 235/17R16 Insa Turbo Traction Track tyres on a black mods, they are very loud!!!
htr
Well-Known Member
- Posts
- 1,556
- Location
- Central Otago, Southern New Zealand
Used a very heavy duty hydraulic press [100 tn] to push out the drive shaft from the hub assembly. New parts ordered from the old country.
Similar threads
