What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I have removed the Bull bar, I just didn't like it in the end.
myotherworld-albums-little-jobs-things-added-picture15425-spent-some-time-over-weekend-adding-few-bits-side-steps-bull-bar-train-buffer-driving-lamps.jpg
 
Changed the oil & filter.

Had been leaking slightly from the drain plug, old washer looked knackered from over tightening.

Had to destroy a few of the front undertray bolts/screws but got them out.
Also a few other screws were missing where someone had taken the wrong ones out and not bothered to put them back.
Had some M5 allen bolts so used those for the front. Will replace the missing ones next time I get it off, probably when I do an ATF change.

Just wish I had the confidence to change the belts...
 
Reversed with the drivers door open without thinking and caught the door on a post. Defiantly bent something. Need a new door card at least and probably some hinges. Had to move the hinges quite a bit on the pillar to get the door to open and shut without hitting the wing.
Everyone always says it but I was very surprised how much mud was hidden behind the plastics, defiantly need to clean them all out.

Had tc and hill decent lights come on last night, then when in tesco I reversed up to a car and found I had no brake lights. After reading so much on here I immediately thought brake light switch. Today I spend 10 mins upside down getting a bad back trying to get the brake switch out then realised I forgot to check the fuse.
Fuse blown. Nice easy fix :)
 
Kizzeh said:
Reversed with the drivers door open without thinking and caught the door on a post. Defiantly bent something. Need a new door card at least and probably some hinges. Had to move the hinges quite a bit on the pillar to get the door to open and shut without hitting the wing.
Everyone always says it but I was very surprised how much mud was hidden behind the plastics, defiantly need to clean them all out.

Had tc and hill decent lights come on last night, then when in tesco I reversed up to a car and found I had no brake lights. After reading so much on here I immediately thought brake light switch. Today I spend 10 mins upside down getting a bad back trying to get the brake switch out then realised I forgot to check the fuse.
Fuse blown. Nice easy fix :)
Click to expand...



Always a reason the fuse blew...... keep an eye on those brake lights
 
The Mad Hat Man said:
was it raining? or did yu wash it first? :eek:
Click to expand...


Ahem... It's the missus car so hasn't been washed in a while, Infact since I last did it......which is may!
I reckon the lz10 mud is holding it together

I'll certainly be keeping my eye on everything brake light related, I am not particularly fond of chasing intermittent problems
 
Fitted Sun Roof blinds.............



Genuine brand new Land Rover part for the shocking price of...........................£9.99 with free overnight delivery.
 
Woke up with a flat NSF tyre on the 1, so took the opportunity to get all the wheels re-balanced which I was going to do anyway :D Had to lift the car over 500mm off the ground to get all the wheels off like

 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
657
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
249
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
725
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
628
Hippo
Hippo
Back
Top