What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
So far today.... Drove it to work, then before I got a job come in I stuck it on the ramp got the tracking gauges out and adjusted the front toe setting...

Then I gave it a quick wash including a steam under the bonnet!

Now it is parked for 4 days...:(
 
Sold it!!

My Hippo didn't get anywhere enough use to justify the running costs.

Sticking around though to see what you guys are up to.

I'd like to thank everyone for all the superb advice I have received on this forum.
 
Last edited:
NoDosh said:
FIA cage and seats also on the list at some point (nice to have), as is a commercial bulkhead behind the front seats.

You can't fit both the roll cage and the commercial bulkhead. Also the only rollcage manufacturer I know who will make you a cage is Tornado Motorsport in Hilton, Derbyshire. Safety Devices haven't done one for years. A bespoke cage will cost megabucks and Tornado already have the set-up. They supplied and fitted one for my V6 in 2007. I've just sold my Td4 with a Safety Devices cage in. Still have my Tornado built Rally Freelander with full space-frame type welded in cage - now that's real trick ! Comes through the bulkhead into the engine bay and also forms the turret tops for the suspension.
Click to expand...
 
You can if you cut the commercial bulkhead about...... It's more to make the rear load area dog friendly, so happy to butcher it about a bit. And thank you for the heads-up on Tornado, I'll give them a shout.

Was that your v6 in blue/white/yellow that just sold on eBay? Was watching that with some interest.
 
changed oil & filter and...
everytime I do it I take the time to lube the clutch release arm, but today I found the slave cylinder "too wiggly"



WTF it is only a 3 year old part and it already has 2 cracks in it!!!
I guess I should feel happy to have gotten to it in time and not after having to drive almost 1 hour in 2nd gear to get home as the last time.
has anyone ever modified the bracket to make it more resistant?
I've seen the kit from Dark Ice Designs for the Rover 45 and I guess it could be adapted to the Freelander but I don't need the hole assembly only a bracket that wouldn't break.
 
Last edited:
baptista said:
changed oil & filter and...
everytime I do it I take the time to lube the clutch release arm, but today I found the slave cylinder "too wiggly"



WTF it is only a 3 year old part and it already has 2 cracks in it!!!
I guess I should feel happy to have gotten to it in time and not after having to drive almost 1 hour in 2nd gear to get home as the last time.
has anyone ever modified the bracket to make it more resistant?
I've seen the kit from Dark Ice Designs for the Rover 45 and I guess it could be adapted to the Freelander but I don't need the hole assembly only a bracket that wouldn't break.
Click to expand...

The Dark Ice Designs clutch kit is the same as a guy on various forums called "Sheddist". He made up a kit for the ZS/ Rover 45 some years ago. Sadly that kit won't work correctly with the Freelander bulkhead. I was looking into fabricating a stronger set up, but general consensus was there wasn't any need for it.
 
GrumpyGel said:
Do they crack in the same place every time? If so, could it be possible to put some weld where it cracks to strengthen that area?
Click to expand...

exactly the same place but you can't "thicken" the plate cause then the slave wouldn't fit; only way I see it would be to make an additional mounting point for the slave
 
NoDosh said:
You can if you cut the commercial bulkhead about...... It's more to make the rear load area dog friendly, so happy to butcher it about a bit. And thank you for the heads-up on Tornado, I'll give them a shout.

Was that your v6 in blue/white/yellow that just sold on eBay? Was watching that with some interest.
Click to expand...

Yes but it was in mint condition when I sold it to him. He's made a real mess of it and a massive profit too. Typical. Owed me the best part of 6k when he bought it from me 18 months ago for only £2650 and it was gas converted. Just sold my silver td4 too. Need to get my rally freelander back on the road.
 
Today, I have been mostly taking my TD4 back to the garage to get them to replace the locking wheelnut key that some :censored: meathead stripped the spline thingies from.
Typical - my first post in the forum and it's a rant!
 
EmmaJNation said:
Today, I have been mostly taking my TD4 back to the garage to get them to replace the locking wheelnut key that some :censored: meathead stripped the spline thingies from.
Typical - my first post in the forum and it's a rant!
Click to expand...

welcome


to be fair this is a really easy job :p i mean to rip off the locking wheel nut... not stripping it :) any thieving scum with an ebay account can buy a set of locking wheel nut removal tools for a fiver.

Thats why i dont bother fitting em :)
 
Today I have straightened up the back door window which was off to one side and hitting the frame and then cleaned up the faded headlights with Autoglym metal polish.

Before;


and after;
 
Last edited:
started to install my heated fuel filter in order to twin tank the FL1

20140722_201255_resized_1_1.jpg
 
vilguy said:
to be fair this is a really easy job :p i mean to rip off the locking wheel nut... not stripping it :) any thieving scum with an ebay account can buy a set of locking wheel nut removal tools for a fiver.

Thats why i dont bother fitting em :)
Click to expand...

i'll be round for my new wheels shortly then :D
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
650
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
244
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
722
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
627
Hippo
Hippo
Back
Top