Skinny Mike
Well-Known Member
- Posts
- 2,910
Eerrrr 10 years!!
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jedi
Well-Known Member
- Posts
- 2,327
- Location
- A Galaxy far far away.......
Lifted the bonet, checked the coolant was there. ...it was....Bonus!.....closed bonet...job done..
RealBeale
Active Member
- Posts
- 533
- Location
- Birmingham
Another boot gone on my o/s front driveshaft. Replaced driveshaft. Quicker and less messy than replacing boot, and not much dearer either.
tina2709
Well-Known Member
- Posts
- 6,063
- Location
- mostly on my street
duncanpage4
Active Member
- Posts
- 455
- Location
- East Sussex
Ordered a Borg & Beck clutch kit today too.
Have decided I'm going to stick with the DMF.
Have been having problems with my dash clock turning itself off and not keeping time.
A few weeks ago I was stuck on the M6 when they closed it when cleaning up an accident and I used the time to remove the clock and have a look.
The only thing I could find was that the left screw thread was loose, so I fitted a bigger screw & it's stayed secure & has been keeping time ever since!
Have decided I'm going to stick with the DMF.
Have been having problems with my dash clock turning itself off and not keeping time.
A few weeks ago I was stuck on the M6 when they closed it when cleaning up an accident and I used the time to remove the clock and have a look.
The only thing I could find was that the left screw thread was loose, so I fitted a bigger screw & it's stayed secure & has been keeping time ever since!
Winu
Active Member
- Posts
- 795
- Location
- Poland,Warsaw
How about a magic trick? 
Let's change that one:
to that looking nice one:
with fixed internals
:bounce:
Let's change that one:
to that looking nice one:
with fixed internals
:bounce:
Last edited:
griff2
Active Member
- Posts
- 694
- Location
- STAFFORD UK
decided to take the dif plate off and change the dif oil ,was a #### to get at the top bolts but got it off
quite a bit of metal filings in there :-(
but to be honest i think thats the first time in years its been taken off looking at the colour of the oil
not to sure what gasket sealant was on there but #### me its not easy to get off
will get a razor blade tomorrow to scape the dif housing
as for the teeth none seem to have chunks missing even thought there was more metal filing than i like
cant do anymore at car till i get the razor so tried scaping the cover in the kitchen and get all the bolt threads clean
quite a bit of metal filings in there :-(
but to be honest i think thats the first time in years its been taken off looking at the colour of the oil
not to sure what gasket sealant was on there but #### me its not easy to get off
will get a razor blade tomorrow to scape the dif housing
as for the teeth none seem to have chunks missing even thought there was more metal filing than i like
cant do anymore at car till i get the razor so tried scaping the cover in the kitchen and get all the bolt threads clean
Dangermike
Active Member
- Posts
- 482
- Location
- Benfleet Essex
Fitted some ring microline fog lights to my lower grill, using my make shift fog light switch works perfectly! 
using my make shift fog light switch works perfectly! weirdbeardmt
Active Member
- Posts
- 193
- Location
- Here and there.
Finished testing the coils - all seem to be OK. Finished plugs. Got sump guard off (easy!) Found mini ratchet.
Fitted new inlet manifold chamber and reattached all the miscellaneous gubbins.
Went to start... and... FIRST TIME. Get in. Still sounds lumpy :S
Let it run, changed the oil and filter.
Sump guard back on - with a lot of effing and jeffing. Took it for a quick run. Still lumpy. MIL light still on. Fek.
Fitted new inlet manifold chamber and reattached all the miscellaneous gubbins.
Went to start... and... FIRST TIME. Get in. Still sounds lumpy :S
Let it run, changed the oil and filter.
Sump guard back on - with a lot of effing and jeffing. Took it for a quick run. Still lumpy. MIL light still on. Fek.
weirdbeardmt
Active Member
- Posts
- 193
- Location
- Here and there.
Oh and fitted a tow bar.
DaveDesign
New Member
- Posts
- 34
- Location
- Northampton
Fluid change for power steering.
replaced water pump
Fecked up cambelt
refitted cambelt
new drive belts
refilled and bled coolant
replaced water pump
Fecked up cambelt
refitted cambelt
new drive belts
refilled and bled coolant
myotherworld
Active Member
- Posts
- 182
- Location
- Birmingham
Needed to get one of the head lights out, anyone know if the lever thingy in the head light can be changed (btw its a 2004 facelift) also want to fit a bull bar and some driving lamps. So took the front bumper off (no big f**king deal)
every bloody screw was rusted fast and every plastic bung was shot, replaced all the screws with S/Steel ones and replaced all the clips the screws go into. Tomorrow will tap the four bottom holes for new bolts.
every bloody screw was rusted fast and every plastic bung was shot, replaced all the screws with S/Steel ones and replaced all the clips the screws go into. Tomorrow will tap the four bottom holes for new bolts.
apfashleypf
Member
- Posts
- 12
- Location
- Tamworth
right here goes, I have a Freelander 1. 2000 millennium edition on a "W" plate, 1.8 petrol, with 133,000 on the clock.
I fitted a full set of Polly bushes, front brake discs and pads, antiroll bar drop links, new exhaust from cat back, wax oiled the underneath, changed the Oil, Filter, Dissy cap, leads, rotor arm, plugs, air filter, fitted a kenlowe thermostat to one of the fans and a manual switch to the other, I think I spent more than the landy is actually worth but I still love it, I now need 2 new tyres, the drivers door lock mechanism and source a new or recon viscous unit as its running in mondo mode at the moment. I'm determined to get it to 200,000 miles
I fitted a full set of Polly bushes, front brake discs and pads, antiroll bar drop links, new exhaust from cat back, wax oiled the underneath, changed the Oil, Filter, Dissy cap, leads, rotor arm, plugs, air filter, fitted a kenlowe thermostat to one of the fans and a manual switch to the other, I think I spent more than the landy is actually worth but I still love it, I now need 2 new tyres, the drivers door lock mechanism and source a new or recon viscous unit as its running in mondo mode at the moment. I'm determined to get it to 200,000 miles
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
mine is halfway there,does that count.lol
mines at 118k but is considerable older than yours
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
mines at 118k but is considerable older than yours
but mine is betterererererer than yours,ner.
but mine is betterererererer than yours,ner.
no-ones Freelander is better than the one we own
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
no-ones Freelander is better than the one we own
don't be gettin all philosophical on ere matey.not the done thing ya nose.
Similar threads
