What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
My FL2 is only a gs so never had a centre armrest from new so three weeks ago when i bought the car, i ordered one from Amazon and it turned up today from China. Not the best fit-it needed fair bit of jigging around until i was happy but i got there in the end.

It does have five usb ports for charging phones etc.....which are not wired into anything which did make me laugh.:)

They supplied four additional screw which i couldn't work out what they were for until i realised they were thinking of me personally-i feel so loved! 🥰


I suffered several strokes four years ago and my manual dexterity isn't good to say the least and i lost two screws down side of passenger seat.
 

Attachments

  • Consol.jpg
    Consol.jpg
    287.9 KB · Views: 72
I have no idea how I'm going to get power over there
 

Attachments

  • IMG_20240817_163346.jpg
    IMG_20240817_163346.jpg
    113.9 KB · Views: 66
  • IMG_20240817_163128.jpg
    IMG_20240817_163128.jpg
    103 KB · Views: 64
  • IMG_20240817_163124.jpg
    IMG_20240817_163124.jpg
    111.1 KB · Views: 63
Not today, but over the last couple of weeks, I between weather, work and delivery issues, I decided to pull the cylinder head off the FL2. It's had coolant pressurising for a couple of years, but as it was only after it had been running for an hour or so, it never gave me too much trouble.
Anyway I got the head off to discover that the HG had split between the 3 adjacent cylinders (potentially the cause of the misfire too?), and there was evidence of combustion gasses passing to a coolant way.
Getting the head off was a game in itself, as 5 of the 12 the E12 Torx headed bolts broke off, so the bolt heads required drilling off. This was time consuming, as I couldn't risk breaking a drill in the bolt, but I got there eventually. Thankfully, once the heads had broken off the bolt threads, the threads unscrewed easily.
The head had some damage where the gasket failure has allowed combustion gasses to pass to the adjacent cylinders, so the head was re-faced. I took the valves out for the head work, so took the opportunity to lap them in while they out. I'm in the process of getting all 16 valves back in, and fingers crossed, hope to have the engine back together this week, as it'll be going to a new owner once I've proven it's working correctly.
 
kernowsvenski said:
A mixed day today. Bad news is the drivers window cable went but that's easy and cheap though. It'll be the third time I've done that one on this car, along with the other four! The good news though is I picked up this....View attachment 324400
Click to expand...
The Meyle dampers I fitted to mine were blue although slightly darker.
 

Attachments

  • 20211011_123632.jpg
    20211011_123632.jpg
    500.1 KB · Views: 45
  • 20211013_114942.jpg
    20211013_114942.jpg
    403.8 KB · Views: 62
Getting to the fun part of Freelander ownership
 

Attachments

  • IMG_20240824_134819.jpg
    IMG_20240824_134819.jpg
    160.4 KB · Views: 46
  • IMG_20240824_134555.jpg
    IMG_20240824_134555.jpg
    163.9 KB · Views: 45
  • IMG_20240824_122934.jpg
    IMG_20240824_122934.jpg
    163.1 KB · Views: 48
  • IMG_20240824_122653.jpg
    IMG_20240824_122653.jpg
    165.7 KB · Views: 52
  • IMG_20240824_122611.jpg
    IMG_20240824_122611.jpg
    267.9 KB · Views: 46
  • IMG_20240824_011625.jpg
    IMG_20240824_011625.jpg
    45.7 KB · Views: 54
  • IMG_20240823_185811.jpg
    IMG_20240823_185811.jpg
    132.5 KB · Views: 48
  • IMG_20240823_183224.jpg
    IMG_20240823_183224.jpg
    70.6 KB · Views: 48
Not much and not today. Yesterday, i ceramic coated the bodywork using Meguiars ceramic hybrid wax after first applying several coats of Autoglym super resin polish. Autoglym will always be my first choice because no other brand can come close to its shine and ease of use but its only a showroom polish so adding ceramic coating over the top helps it last longer.

Can't get a photo of my pavement princess cos its tipping it down.:)
 
Recently changed the power steering reservoir and flushed 2L of titan chf202 hydraulic oil through it to give the system a clean with the propper oil. I lifted the front end to take the weight oft the tyres so I could turn the steering wheel with the engine oft, to pump the oil round the system. Oil that came out was darker than the new stuff.
 
Finally stripped down my old TD4 engine with the broken crank for spares. Will post some photos and the block is damaged where the crank floated about but for a 135k engine it is really mint. No noticeable wear on bearings, bores or anything really.

Now have 3 boxes of all the bits from it for spares. The bits you just can't find. Also took photos as a training exercise. Nice to see inside and around the engine while nothing the vehicle.
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
794
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
406
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
893
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
678
Hippo
Hippo
Back
Top