Hope you are going to serialise your conversion on here Andy!
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
Could be worse, I know of two idiots talking about doing an EV conversion!
https://www.landyzone.co.uk/land-rover/freelander-ev.360880/
Last edited:
Reading that thread is an education. I've gone from "that'll be a doddle" to "oh, there's a fair bit more to this than I realised". I haven't quite got to the point where I truly understand the true extent of my shear lack of knowledge and ignorance - but that is generally when you are in the foot hills of the north face of the Eiger-shaped learning curve that one would need to climb to complete one of these conversions.Could be worse, I know of two idiots talking about doing an EV conversion!
https://www.landyzone.co.uk/land-rover/freelander-ev.360880/
A 1.8T conversion? That'll be a doddle. Oh, no, wait...
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
The last guy that did a 1.8T conversion ended up installing an aftermarket ecu and dash IIRC. Not a cheap option so maybe the work Nodge and I are doing will help with a conversion like this too.
I think Philip @pscan.eu can help with that so you only need one ECU...
It's quite involved with the integration of the other modules, but I'm sure it's not impossible.
I don't believe that conversion is a difficult as it has been made in the past. I looked into doing a VVC conversion a while back, and I reckon a slave ECU would be the way forward. However I changed my mind, so didn't look in to it and further.
That's not the way I'd have done it myself.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
Nor me. If I can't do this and make the dash work as normal or at least all the major components I won't be going any further but I believe it can be done and am determined to make it work.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
I'm sure it isn't simple, and I am watching how LRO magazine do it, but a chap local to me reckons he did one by using the 1.8T ecu and engine loom and isolating the freelander immob from the ecu. This could probs be done properly with pscan's support.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
If we manage to figure out the CAN stuff for an EV the info should be relevant for this too.
https://www.landyzone.co.uk/land-rover/freelander-ev.360880/
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Filled up after a run to Berkshire and back (from Devon) - 38mpg - TD4 Auto 175k miles.
Happy for now !
Happy for now !
Jayridium
Well-Known Member
- Posts
- 1,416
- Location
- Pedronapper (Peterhead)
38mpg - NICE!
Scotty McScrooge disappears off into a shadowy corner muttering something about rolling resistance of offroad tyres and larger rolling diameter screwing with his odometer gimping his MPG figures
I'm sure it looks good.... But I'd know better if you posted a picture of it
Not done anything to my Facelift TD4 SE auto for ages.
But this morning I won this for £2k on an Ebay auction.
I'm kinda expecting the seller to tell me it's not for sale, or it's broken or something, as it was what I'd describe as very cheap, although it does have a misfire, which may or may not be serious.
But this morning I won this for £2k on an Ebay auction.
I'm kinda expecting the seller to tell me it's not for sale, or it's broken or something, as it was what I'd describe as very cheap, although it does have a misfire, which may or may not be serious.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
That would make a VERY nice EV.Not done anything to my Facelift TD4 SE auto for ages.
But this morning I won this for £2k on an Ebay auction.
I'm kinda expecting the seller to tell me it's not for sale, or it's broken or something, as it was what I'd describe as very cheap, although it does have a misfire, which may or may not be serious.
That would make a VERY nice EV.
It would, although I'd never get permission from the wife to cut it about.
I'm not allowed to turn the FL1 SE into an EV either.
Last edited:
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
It is photographed on East Devon Cars forecourt. If the garage are selling it then the sale should be honoured OK.
Good find. Mot history looks fair, not that I am stalking it!!!
Nice looking FL2!Not done anything to my Facelift TD4 SE auto for ages.
But this morning I won this for £2k on an Ebay auction.
I'm kinda expecting the seller to tell me it's not for sale, or it's broken or something, as it was what I'd describe as very cheap, although it does have a misfire, which may or may not be serious.
Here’s my pic
Looks good - how good is it for keeping out the weather? Also, what are those tabs along the leading edge of the retainer rail for?
Similar threads
