What have you done to your Freelander today

chrish2012 · Jan 24, 2013

sparkysbandit said:
any chance of a link? or where you got them from dude

Not too sure how to attach a link to ebay but hopefully from this you should be able to find the bulbs.

2 PCS 1156 BA15S 12W 4 CREE Q5 Car Wedge LED Reverse Lamp... (130822550099)
Member ID fiveseason88

sparkysbandit · Jan 24, 2013

chrish2012 said:
Not too sure how to attach a link to ebay but hopefully from this you should be able to find the bulbs.

2 PCS 1156 BA15S 12W 4 CREE Q5 Car Wedge LED Reverse Lamp... (130822550099)
Member ID fiveseason88

yep that worked...cheers

are they brighter than the standard ones?

chrish2012 · Jan 24, 2013

sparkysbandit said:
yep that worked...cheers

are they brighter than the standard ones?

Much brighter and cleaner white light, if you check there shop they also have 7w bulbs which may be better for fog lights etc.

sparkysbandit · Jan 24, 2013

chrish2012 said:
Much brighter and cleaner white light, if you check there shop they also have 7w bulbs which may be better for fog lights etc.

cheers

chrish2012 · Jan 25, 2013

Four new General Grabber AT's fitted

JC600 · Jan 25, 2013

Fitted rubber spacers along the back of the Mantec sump guard to stop the creaking noise, seems to of worked.

WLJayne · Jan 25, 2013

I did the final hose-tweak on my EWP system which is now working nicely. I blanked off the bleed hose that normally comes off the head and ran a hose from the inlet manifold to a T juntion in the header tank feed hose.

Just need a good thrash now to clear all the air out

.

Garboy88 · Jan 25, 2013

Garboy88 said:
Well I drove to work and as I pulled up outside the brake pedal hit the deck and there was a big grinding noise! So I took it inside, took the front wheels off and the brake pads had turned to dust! Lol there was nothing left on them! Lol

So I bought new pads, took the calipers off and loads of broken pad fell out! Bloody thing! Under further inspection the disks are fecked and the piston on the caliper is rusted to hell and back so I've ordered new calipers and disks, there arriving tomorrow dinner time so change it all over then I'll put some pics up tomorrow

.

matt1295 · Jan 25, 2013

Had to remove the Track arms today to free the track rods as they were seized while car was in the air i took the time to decat aswell

once all that was done i took it back for the tracking to be adjusted

Jonnytd4 · Jan 26, 2013

Just done the de egr mod! Didn't bother cleaning the inlet out it was pretty god damn clean! Surprising as its on 90k

mick 1986 · Jan 26, 2013

Just picked up a custom roof rack, now to re customise it to my needs!

baptista · Jan 26, 2013

mick 1986 said:
Just picked up a custom roof rack, now to re customise it to my needs!

would you place some pictures please, my head hasn't produced any good ideas recently

hd3 · Jan 26, 2013

re roof rack ..
saw this one at another forum ( see atached pic )

hd3 · Jan 26, 2013

pressure washed the underbody ..

sparkysbandit · Jan 26, 2013

fitted a new upgraded header tank and lid which arrived today.

and new side lights

then done 80 mile on some of the crappiest roads in northumberland

pardec · Jan 26, 2013

hd3 said:
re roof rack ..
saw this one at another forum ( see atached pic )

that looks good.................want one

bukko · Jan 26, 2013

Replaced coolant reservoir.

Still leaks though (see dribble stains on image).

getting muddy · Jan 26, 2013

played in the snow deep in the dales :5bhurray:

DD3 · Jan 26, 2013

pardec said:
that looks good.................want one

Yeah, like the look o that roof rack! Weather took a turn for the better today in these parts, bit warmer and some sun. Anyhoo, ditched my blanking plate and refitted the drive sprocket pinion thing. Tbh was dreading this as had a go before and had to abandon when the bleddy thing wouldn't go back in. Looks easy and straight forward but nothing ever is. Still its back on now, along with mass damper so I'm close to being 4x4 again - big relief whether I sells her or not - yes sudden doubt about my plan, having spent plenty time and dollar on the old girl bla bla!! Fitting the blanking plate has no reason to it that I can remember, so don't bother!

entilzah · Jan 27, 2013

i did this well yesterday and today

What have you done to your Freelander today

Member

Active Member

Member

Active Member

Member

Well-Known Member

Well-Known Member

Active Member

Attachments

New Member

New Member

Well-Known Member

Active Member

Well-Known Member

Attachments

Well-Known Member

Active Member

Active Member

Well-Known Member

Attachments

New Member

New Member

Member

Similar threads