What have you done to your Freelander today

Skinny Mike · Apr 4, 2015

New front rear diff mount. And a big ThAnKyOu to Hippo for the picture guide.
Cheers
mike

DastardlyDan · Apr 4, 2015

Fitted my EVRY mod - so that's another 10-20Bhp on demand
https://youtu.be/-C4vdpWDQO0

Tried a full-fuel mod, that forces the pump to give 100% of it's capacity, but the ECU doesn't like it, and just shuts down :lol:
https://www.youtube.com/watch?v=bWzG_h47K1k

Rebuilt the starter motor, the contacts had gotten so worn it would take SEVERAL attempts at turning the ignition before it would actually do anything. Now it's first time, every time

And fitted these beauties:

Still got the larger injectors to fit, larger turbo to finish making adaptor plates for, decat to fit.... and no time to do any of it :lol:

GrumpyGel · Apr 4, 2015

DastardlyDan said:
Fitted my EVRY mod - so that's another 10-20Bhp on demand
https://youtu.be/-C4vdpWDQO0

You've 'repurposed' the HDC switch to make the engine hunt?

DastardlyDan · Apr 4, 2015

only hunts at idle - when accelerating it's a beast

Diesel Do · Apr 4, 2015

Having a little experiment

GrumpyGel · Apr 4, 2015

DastardlyDan said:
only hunts at idle - when accelerating it's a beast

As if the L Series in standard trim isn't beast enough!

:crazy_driver:

tincan · Apr 5, 2015

changed top ball joints, anti roll bar bushes two new handbrake cables and sorted out seized rear brake adjusters happy days

longdog · Apr 5, 2015

Cleaned the crud from behind the front wheel arch liners on both cars, '02 that goes off road and '06 that doesn't. Did the rears a few months ago and they were just as bad.

DastardlyDan · Apr 5, 2015

Not directly work on the Hippo... but started the process of reclaiming it's (soon to be fitted) uprated turbo from my Rover 45

coops555 · Apr 5, 2015

Fitted new tailgate door handle and gave it a proper clean with snow foam, clayed and Polish then waxed

neilhull · Apr 5, 2015

Tried to fix the 3 amigos fitted New wheel bearing and abs sensor . Still got the 3 amigos

NeedleNose · Apr 6, 2015

Last week I made a roof rack, today I fitted it.

Longbolt · Apr 6, 2015

NeedleNose said:
Last week I made a roof rack, today I fitted it.

Nice!..very african safari camel trophy strapping the jerry cans to the roof ish.

Longbolt · Apr 6, 2015

Well, finally drilled all the holes in the chassis and placed the explosives. Then wired up the detonator distribution box.

Just a matter of waiting for the Beethoven exploder unit and rolling out the main electrical line.

Then its off to waitrose for some decent wine and steak for the barbie, invite a few friends around, and happy times having a press the button party!.

All are welcome to the bits and pieces (if they survive the heat of re-entry)

htr · Apr 7, 2015

Oh dear, tried to fit my new replacement radiator today. LRD have sent the wrong part! The rad' is about 50mm to tall! B#*@&r.

timster66 · Apr 7, 2015

Bought and fitted set of 4 window wind deflectors
And bought a set of 16" alloys, in the process of refurbing them (satin black) and then looking to stick some all terrain tyres on them, thinking of Event ML 698s, 215/65/16

[/URL]

timster66 · Apr 7, 2015

NeedleNose, like that roof rack mate, very nice!!!

NeedleNose · Apr 7, 2015

Thanks guys, thinking of extending it over the sunroof but need to find a local pipe bender.

htr · Apr 9, 2015

Finally, changed the IRD & diff oils. Ordered a replacement radiator from UK, company sent the wrong one! I can say with no doubt that the V6 rad' is taller than the 4 cyl' rad by about 55mm

griff2 · Apr 9, 2015

stripped all the engine down to get to the thermostat that was totaly ####ed

What have you done to your Freelander today

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Active Member

Attachments

Active Member

New Member

Member

Active Member

Active Member

Active Member

Well-Known Member

Member

Member

Active Member

Well-Known Member

Active Member

Similar threads