moremuckmush
Well-Known Member
- Posts
- 174
- Location
- Durham
What have you done on your 90/110/130 today?
- Thread starter neilly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
moremuckmush
Well-Known Member
- Posts
- 174
- Location
- Durham
moremuckmush
Well-Known Member
- Posts
- 174
- Location
- Durham
yep I was suprised , it's nearly all original apart from where the previous owner touched in with a yard brush on the wings , of course all the paintwork has plenty patina
Headlining and trim now out, water leak tracing and derusting where it’s been hidden for years!
One side of the rear seat belt hardware finally out - previous owner gave up having used an angle grinder and cut slots in the seat box in places - vandal, but they were well rusted in. Perseverance, PlusGas, swearing….done.
One side of the rear seat belt hardware finally out - previous owner gave up having used an angle grinder and cut slots in the seat box in places - vandal, but they were well rusted in. Perseverance, PlusGas, swearing….done.
Attachments
Hicap phill
Well-Known Member
- Posts
- 16,241
- Location
- Wiltshire
Battery arrived & fitted. Cranks straight up so all good.
Now the battery I have removed will go onto the S1
now to fit the other battery that arrived to the Motobike.
Also On a plus side the delivery driver put these batteries into my shed instead of leaving on the door step
zeaphod
Well-Known Member
- Posts
- 3,107
- Location
- Belfast, Norn Iron
Fitted a slickshift. It definitely does reduce the throw required to change gear quite a bit. Adjusting the bias springs correctly removes almost all the wobble/slack too - this bit would help even without fitting the kit and is an easy job.
Hicap phill
Well-Known Member
- Posts
- 16,241
- Location
- Wiltshire
Broke my side mirror.
The other side has come loose on the bracket.
time for some new bigger mirrors
The other side has come loose on the bracket.
time for some new bigger mirrors
Finished clearing out/removing the rear seat hardware, every bolt was a rusty knacker. Don’t think I’ll refit the seats….
Tried to replace the busted aerial, it’s all hidden behind the dash - for another time.
While rummaging behind the instrument binnacle, found the ABS ECU, full of surprises this one!
Tried to replace the busted aerial, it’s all hidden behind the dash - for another time.
While rummaging behind the instrument binnacle, found the ABS ECU, full of surprises this one!
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
@Hicap phill , you may like to replace with convex mirrors - I bought these for the Ninety and they give excellent rear/side viewing
Hicap phill
Well-Known Member
- Posts
- 16,241
- Location
- Wiltshire
I will look at these as my shed is getting low on mirrors now.@Hicap phill , you may like to replace with convex mirrors - I bought these for the Ninety and they give excellent rear/side viewing
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
How many other fine gentlemen can quote, "My shed is getting low on mirrors..." Brilliant!
- Posts
- 9,097
- Location
- North Lincs
I'm not a fine gentleman but I only have one drivers mirror left in stock.....
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
@Hicap phill , I have a pair spare used set with good mirrors, if needed...
Hicap phill
Well-Known Member
- Posts
- 16,241
- Location
- Wiltshire
Thanks for the offer,I just removed a spare off some old doors.@Hicap phill , I have a pair spare used set with good mirrors, if needed...
Every time I go in the shed I find a job I should have done.
Repair old wind up doors
Repair transfer box
Similar threads
