What glue to use?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
htr

htr

Well-Known Member
Posts
1,556
Location
Central Otago, Southern New Zealand
Sadly I've managed to break off the locator 'cups' on the rear door card. These are on the back of the card and hold the plastic pins in place - These pins then push into the plastic holders in the tail door itself.

My questions are: What type of plastic is the Freelander's interior? OR What is the correct glue to use?
I tried some modellers poly glue - what kit builder use for those polystyrene aircraft kits ... when dry it just chipped off. So it's not a "'styrene". I've used 'Araldite' in the past but it too doesn't 'key' into the plastic despite giving the surface a rough-up to held it key in.

Suggestions please as to how I can effect a decent repair.
 
I’d just buy something like these and find a replacement.
If need be, drill through the card, use a suitable fastener, and paint the top (if your that fussed about seeing it)



IMG_1514.jpeg
 
htr said:
Sadly I've managed to break off the locator 'cups' on the rear door card. These are on the back of the card and hold the plastic pins in place - These pins then push into the plastic holders in the tail door itself.

My questions are: What type of plastic is the Freelander's interior? OR What is the correct glue to use?
I tried some modellers poly glue - what kit builder use for those polystyrene aircraft kits ... when dry it just chipped off. So it's not a "'styrene". I've used 'Araldite' in the past but it too doesn't 'key' into the plastic despite giving the surface a rough-up to held it key in.

Suggestions please as to how I can effect a decent repair.
Click to expand...
If you're having trouble, I have the door card in the parts car. Its a 2001 model (hopefully the same) and may be rather moldy - I'll have a look tomorrow.
 
Given the relatively small surface area you will have to ‘glue’ the plastic rivet heads back on with, I’d suggest nothing will hold that well.
I’d still go with a replacement stud personally…
 
Stv123 said:
Amazon product
Click to expand...

ExcellaElite T7000 Super Glue, Black Strong Glue, 110ml Multi-Function High Precision Industrial Adhesive for Phone Jewelry Glass Wood Fabric Tyre Crafts​


Why would that glue a plastic rivet, with a cross-section of about 1/4”, with any strength?
That stuff cures like a sealant.
 
Why would you try to glue a rivet? Surely you would just replace it. I assumed it was to glue the panel back on.
 
I'm not glueing the actual rivet it's there molding on the door card which holds the rivet. When putting the door card back on you press the card firmly and those rivets go 'home' into their respective holes...
 
htr said:
I'm not glueing the actual rivet it's there molding on the door card which holds the rivet. When putting the door card back on you press the card firmly and those rivets go 'home' into their respective holes...
Click to expand...
Yes, I know, but I thought you snapped yours off the card?
Therefore, why not just replace them?
 
Some photos to help:
Should look like the 1st pic.

But I've snapped off the holders as in the 2nd & 3rd pic - I want a good glue / adhesive to stick them on again.

A replacement door card is a good idea but an auto dismantler is a 2 hour drive / 200+ km for me. That is a very kind offer G- I'll be in touch!
 

Attachments

  • IMG_4695 2.JPG
    IMG_4695 2.JPG
    344 KB · Views: 70
  • IMG_4696 2.JPG
    IMG_4696 2.JPG
    288.7 KB · Views: 72
  • IMG_4697 2.JPG
    IMG_4697 2.JPG
    290.2 KB · Views: 76
You will struggle to do a good repair by gluing it back together because as someone mentioned there is only a small surface area. I suspect you will have to devise another way to attach it or come up with a replacement.
 
You must log in or register to reply here.

Similar threads

M
Freelander 1 VCU off for car how to test
Replies
2
Views
299
GrumpyGel
GrumpyGel
Naf623
Disco 2 What fixings to use for the wheel arch liners?
Replies
2
Views
564
jamesDiscoTD5
jamesDiscoTD5
J
Freelander 1 Tailgate door
Replies
4
Views
1K
joel4507
J
L
PLASTIC TRIM PANEL REPAIR METHOD
Replies
1
Views
506
Stanleysteamer
Stanleysteamer
J
SOLVED - FL1 Driver's door lock barrel/cylinder replacement.
Replies
2
Views
790
John_l_k
J
Back
Top