- Posts
- 33,600
- Location
- North Shropshire
Saves scraping/de-icing in the winter, clumps of ice on the wipers etc. It just clears and stays clear
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
A quick squirt of de-icer does the job and the heater keeps it clear except in Canada in minus 45C with snow falling.
- Posts
- 33,600
- Location
- North Shropshire
Maybe the stuff you get is better.. the deicer here has a tendency to refreeze again after a minute or so
Got the passenger side head off today 
There was heaps of coolant in the head and it spilled into the 4th cylinder
The cylinder probably ended up being 1/5th full of coolant and oil which is un-ideal. Put a bunch of rags in to soak it up.
Hopefully drivers side head off tomorrow!
There was heaps of coolant in the head and it spilled into the 4th cylinder
The cylinder probably ended up being 1/5th full of coolant and oil which is un-ideal. Put a bunch of rags in to soak it up.Hopefully drivers side head off tomorrow!
Attachments
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Windscreen guys turned up 8am this morning, chuffed that I had removed all the trim. The new screen WAS heated and tinted(are they all tinted? I suspect so) but the metal mirror mount was for the earlier model so my 2001 mirror wouldn't fit the new screen. 5 mins with his cordless heat gun in an attempt to remove the mount off the new screen and.....CRACK.!
Another 7 days before the new new screen is here.
Another 7 days before the new new screen is here.
- Posts
- 33,600
- Location
- North Shropshire
Unfortunately I'm not surprised.
Last time the guy came out to my train sensor.. instead of using silicon glue to restick, he thought gel hand sanitiser would be good.. it worked.. until he left.. then it started to dry out
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Oooh a train sensor, is that for level crossings?
- Posts
- 33,600
- Location
- North Shropshire
They are mostly unlevel crossings round hereOooh a train sensor, is that for level crossings?
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
few different types of screen with different tints /electrical options and rear mirror connector. Replaced mine with the most basic it still had all the gubbins.
- Posts
- 12,628
- Location
- Sud ouest France !
This is how good it worked....Oooh a train sensor, is that for level crossings?
Attachments
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Not just ice. Way faster for mist and condensation on the screen. I wish the PO had replaced the one on my Jag with original as I miss the Rangie one. Rangie one is original as far as I know and still works a treat.
- Posts
- 33,600
- Location
- North Shropshire
Just as an fyi, filaments on the autoglass screen started to fail quite quickly. None failed on the oem screen so far.
On a related note, only accept an oem replacement for the l322, any other generic replacement will not work, the spec is not the same, which is also why they don't fit properly (you get crack/pop noises from body movement, potholes and bumps in the road etc - this doesn't happen with oem)
On a related note, only accept an oem replacement for the l322, any other generic replacement will not work, the spec is not the same, which is also why they don't fit properly (you get crack/pop noises from body movement, potholes and bumps in the road etc - this doesn't happen with oem)
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Life time guarantee for as long as I own the vehicle I think I read. Does that include a free replacement if the elements fail do you know?
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Screenshot. No mention of heat not working anymore.
- Posts
- 33,600
- Location
- North Shropshire
i suspect.. does the glass still do glassy things.. (Y/N)
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
What limits?!
- Posts
- 33,600
- Location
- North Shropshire
Wear and tear.. stone chips
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Nothing that concerns a p38. Some kind of active thing, sounded very high tech. Other limits were a windscreen cracking when they are doing a chip repair, that's your fault, fitting a s/h window that breaks during fitting, again, your fault.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
I'll have to house brick it every other winter to keep a working heated screen. This one genuinely cracked though, I wouldn't have had it replaced otherwise even though the heat stopped working a while back.
I noticed a lot of "white" showing once the trims were off so damp has been getting in which probably did for the elements. When it's eventually replaced I'll run some good stuff all around the screen edge to seal the glass layers real good before putting all the trim back. The white is mainly along the bottom and 6" up the sides, top is fine.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
I guess trying to prove it was a manufacturing electrical fault and not a vehicle fault that caused the elements to fall would be nigh on impossible for the guy on the street.
