- Posts
- 4,653
- Location
- Rotherham
You know what we say on here. No photos no proof noooo, oh my god my brain has gone into melt downA bisexueliste?
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
What’s those strips with a hole-tooth-hole tooth like a band? You crimp them around at desired length then cut off excess, similar idea to what’s on a P38 hub cv boot?
You drop tested your battery lately (post winter). Could be phantoms?
- Posts
- 33,600
- Location
- North Shropshire
I'll probably shove a penny in to wedge it.. can't rattle then 
I know i know it's not a £500 range rover repair but it's not 'broke'.. just rattly
I know i know it's not a £500 range rover repair but it's not 'broke'.. just rattly
Flossie
Well-Known Member
- Posts
- 11,000
- Location
- Shropshire
Flossie
Well-Known Member
- Posts
- 11,000
- Location
- Shropshire
Not drop tested but it throws the engine over very well. Connected to a smart charger whilst nanoing too.
- Posts
- 33,600
- Location
- North Shropshire
Took a while but i got there
- Posts
- 4,653
- Location
- Rotherham
Spend thriftI'll probably shove a penny in to wedge it.. can't rattle then
I know i know it's not a £500 range rover repair but it's not 'broke'.. just rattly
- Posts
- 33,600
- Location
- North Shropshire
well i can't put a new one on as its crimped from the factory.. to be honest i really dont see what its there for.. maybe it needs to 'fall off' completelySpend thrift
Flossie
Well-Known Member
- Posts
- 11,000
- Location
- Shropshire
Heat shield? So you don't set the dry grass on fire? Remember the new mini car iirc doing that years ago. Twas on the telly.
- Posts
- 33,600
- Location
- North Shropshire
Not sure it's a heat shield.. at least.. why would you have it on just a few inches of pipe? this bit
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Could it be replaced with heat wrap? Like you use on exhaust manifolds
It's an insulator to keep the heat in, stops the DPF cooling too quickly & therefore failing to regen. - As suggested, exhaust wrap (as I used to replace contaminated insulation on my exhaust crossover pipe) would be ideal for the job. There should be some insulation in there, if there isn't, then it's already broken up and drifted away.
- Posts
- 33,600
- Location
- North Shropshire
Thanks! No insulation which is maybe why it rattles!! But no dpf either so maybe i don't care about it anymore
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
The P38A is modular so each computer works separately. Most systems are the same across diesel and petrol with the exception of the EMS and the HEVAC on the GEMS and even then I think the way the HEVAC communicates with diagnostics is the same.
- Posts
- 33,600
- Location
- North Shropshire
No it's one i found on the internet.. i have the dpf unit, it's just empty
It was easier than trying to get a photo under the car still have all the sensors plugged in but they don't do anything
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
The HEVAC is different on the GEMS? Tell me more, I thought all HEVAC's in the P38 were the same apart from the aircon drive circuit and of course the manual no aircon version.
- Posts
- 3,877
- Location
- Near Heathrow.
Correct, all HEVAC are the same except the compressor drive output.
Looked earlier today, and Storey's site seems to show all modules, except the Diesel & SRS. The videos show an earlier version with less ECU's.
Looked earlier today, and Storey's site seems to show all modules, except the Diesel & SRS. The videos show an earlier version with less ECU's.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
That's the part that is different. As far as I am aware the rest is the same but I may be wrong. Marty knows a lot more about HEVAC as he's had a lot more apart.
