- Posts
- 33,600
- Location
- North Shropshire
Use your volt meter on the batteryYeah but I don't really trust icarsoft to be that accurate mate I don't know where it pulls the voltage from
Use your volt meter on the batteryYeah but I don't really trust icarsoft to be that accurate mate I don't know where it pulls the voltage from
I did when I got the 12.4 mateUse your volt meter on the battery
One of my customers said “why do you use a RR why not a estate” my reply was “I need a RR to drive on our local roads, and if a wheel enters a pothole, need 4 wheel drive to get out of it” .Took mine for a front tyre to be looked at, been going down for a few days now. Turned out to be damaged on the inside between sidewall and tread so none repairable. Ended up buying 2 part worns for front that were a matching pair and kept the good tyre for a spare.
Interesting thing though was they have 3 bays and 12 of us were waiting. Out of the 12 , 10 had tyre damage and needed replacement tyres. One guy needed a new rim as well. We were all shown our tyres as they came off to show the damage. I use them regular so know a few of the lads and on talking to them they were saying loads of their work is tyre replacement from damage due to the condition of the roads.
Plus the clearanceOne of my customers said “why do you use a RR why not a estate” my reply was “I need a RR to drive on our local roads, and if a wheel enters a pothole, need 4 wheel drive to get out of it” .
Took mine for a front tyre to be looked at, been going down for a few days now. Turned out to be damaged on the inside between sidewall and tread so none repairable. Ended up buying 2 part worns for front that were a matching pair and kept the good tyre for a spare.
Interesting thing though was they have 3 bays and 12 of us were waiting. Out of the 12 , 10 had tyre damage and needed replacement tyres. One guy needed a new rim as well. We were all shown our tyres as they came off to show the damage. I use them regular so know a few of the lads and on talking to them they were saying loads of their work is tyre replacement from damage due to the condition of the roads.
The P38 has nowhere near the boot space my old Volvo 960 hadMy RR has more boot space than my estate did
With the lpg tank behind the seats, it was a problem, but i reckon otherwise both the p38 and l322 have much more usable space than the 3 series bmw estate i hadThe P38 has nowhere near the boot space my old Volvo 960 had
Yup, the 3 series is a small car.With the lpg tank behind the seats, it was a problem, but i reckon otherwise both the p38 and l322 have much more usable space than the 3 series bmw estate i had
I considered an Audi a8 allroad before i got the l322, that's insanely bigYup, the 3 series is a small car.
A bigger heap of crap even than an L322I considered an Audi a8 allroad before i got the l322, that's insanely big
I did think maybe there's even more to go wrongA
A bigger heap of crap even than an L322
Funnily enough even when it was chugging like an old tractor the performance & fuel consumption were unaffected.I chickened out and got mine transported. £300 but worth it for the peace of mind.
When my HG went, it was on #4. Lift the bonnet and you could see it puff!! Blip the throttle and i newly jumped over the moon!! It was like a machine gun. Should have taken a video of that oneFunnily enough even when it was chugging like an old tractor the performance & fuel consumption were unaffected.
Maybe give that a swerve and use the time to iron your underpants, get it driven. It’s clear you once owned a ‘38Given the dirty nature of diesesed engine, should i be routinely cleaning the map sensor? Do you need special stuff to do it?
Do you mean MAP and not MAF? Either way, leave well alone IMO. Diesel might be dirty, but the air going into the inlet manifold should be clean with just a little oil from the turbo's.Given the dirty nature of diesesed engine, should i be routinely cleaning the map sensor? Do you need special stuff to do it?
I've blasted mine with brake cleaner twice since I've had it, was never very dirty anyway and made no noticeable difference (both MAP sensors, I don't feck with MAFs)Given the dirty nature of diesesed engine, should i be routinely cleaning the map sensor? Do you need special stuff to do it?
I thought it was MAP, plug in type sensor rather than a flow through type.Do you mean MAP and not MAF? Either way, leave well alone IMO.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!