It can cause issues, the VC hates it and in worst case scenario can cause expensive bits of metal to turn into glitter.
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
awkwardbob
Well-Known Member
- Posts
- 578
- Location
- Glasgow
Yikes !
So damage to VC, front and rear diffs, CV joints ? Etc ?
I’ll be having some
Choice words with them tomorrow
So damage to VC, front and rear diffs, CV joints ? Etc ?
I’ll be having some
Choice words with them tomorrow
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Not a permanent 4wd?
Did he even look underneath? You’ve not got sarcastic Ejoke stickers on it or something?
Transfer box won’t like 1/2 rolling road
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
He could destroy the transmission as the VCU will lock up. They are supposed to put rollers under the wheels on the axle not being tested.
awkwardbob
Well-Known Member
- Posts
- 578
- Location
- Glasgow
yeah, that’s what I thought.
I contacted DVSA for clarification and they weren’t terribly helpful.
I’m about to speak to the test centre again now.
P38 Monkey
Well-Known Member
- Posts
- 628
- Location
- Cambridge
...or just let it go, and find a test centre that knows what to do.
No offence (and I mean that) but the rest of us don't have this problem.
Some things are just better walking away from, rather than trying to fix their narrow little world for them.
Last edited:
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Show him the manual and failing that it must be possible to report him somewhere for incompetence.
Name and shame on here for a start.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Holy f*ck. He thinks it isn't permanent 4W drive and put it on a front only roller? Take it somewhere conpetent to check for damage.
I would demand a refund, he should have known he doesn't have the correct facilities and, told you he couldn't do the test,
IMO the tw@t should lose his testers licence, hope he hasn't caused any damage.
awkwardbob
Well-Known Member
- Posts
- 578
- Location
- Glasgow
Thanks guys, I’m really angry with them.
On Monday he said ‘because it’s not permanent 4x4 he had done it on rollers’
yesterday -after I’d grilled him on Monday and spoken to DVSA he said: I checked to see if it had permanent 4x4 and put the rollers into 4x4 mode -which is a completely different story.
of course I can’t prove anything and it’s his word against mine.
still think I should get the test fee back based on him failing it for the ABS light…
never again
On Monday he said ‘because it’s not permanent 4x4 he had done it on rollers’
yesterday -after I’d grilled him on Monday and spoken to DVSA he said: I checked to see if it had permanent 4x4 and put the rollers into 4x4 mode -which is a completely different story.
of course I can’t prove anything and it’s his word against mine.
still think I should get the test fee back based on him failing it for the ABS light…
never again
badfluffy
Well-Known Member
- Posts
- 2,132
- Location
- northampton
sounds like bull sh*t to me
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
It is not possible to put the P38 on the rollers in 4 x 4 mode, it must have free rollers put under the axle not being tested. The test rollers under one axle with the wheels on other axle not turning will cause the VCU to lock up and could destroy the transfer box and/or diffs.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
You can ask to see "4x4 mode". As others have pointed out either all wheels are driven or the one axle has to be free to spin. Easy enough to check that.
awkwardbob
Well-Known Member
- Posts
- 578
- Location
- Glasgow
Hmm.
He said that 4x4 mode means one wheel is spun in one direction and the other wheel in the same axle is spun in the opposite direction.
He said that this prevents wind up.
I can’t quite get my noggin around the physics of it but I suppose if the rotation is equal but opposite the net rotation at the prop is zero ?
or is he just covering his arse ?
He said that 4x4 mode means one wheel is spun in one direction and the other wheel in the same axle is spun in the opposite direction.
He said that this prevents wind up.
I can’t quite get my noggin around the physics of it but I suppose if the rotation is equal but opposite the net rotation at the prop is zero ?
or is he just covering his arse ?
Talking out of it more like
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
That would leave no drive to the prop so would be OK, but not sure how an effective brake test could be done with contra rotating wheels and if just one wheel locked then you are back with potential transmission damage.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Used one P38 as a van to collect polystyrene sheets, to darn hot to go in the Transit so went in airconditioned comfort
- Posts
- 12,628
- Location
- Sud ouest France !
Tell him to fûckoff, go somewhere else. Your wasting your valuable effort on a moron. At least you know not to go there again....
- Posts
- 12,628
- Location
- Sud ouest France !
