- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
Already ordered Delphi balljoints full set and seals. Won’t be here to receive them so will be interesting who’s hedge they end up in
How much are decent half shafts? Mine are likely shot to bits, hubs are likely original, 32? Is the hub?
busy jubilee weekend see how bad it gets
Hub nut is 32mm unless it has been replaced with Britpart which will be 36mm and require a thin walled impact socket. I got the local indy to slacken it first with their windy gun.
If you need any heat on anything then stay away from the CV boot and brake flexis!
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I'm sure @Grrrrrr solved his clicking half shafts by using Locktite on the splines.Nearly 30 years old and click like my backI’m sure you’re right and I’m panicking over nothing won’t know the state of anything if I don’t manage to get it apart. Ball joints are here so no turning back now. Delphi units look pretty sturdy full set + axle seals (allmakes) £67 from Maltings off-road Yorkshire
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
Yep. MrGorsky too. You need the green stuff. 642?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Just drove 450mile round trip, over 2 days cos its nice to have a night out in a new place.
Friend arrived from the airport and joined us.
The only mess up on my part was I actually paid for some fuel, I try to save my allowance for beer.
L322 was fine.
J
.Friend arrived from the airport and joined us.
The only mess up on my part was I actually paid for some fuel
, I try to save my allowance for beer.L322 was fine
.J
Datatek
Well-Known Member
- Posts
- 44,911
- Location
- Near Poitiers SW France
More likely the cv joints clicking than the half shafts IMO.Nearly 30 years old and click like my back
Today, the old lady returned us, successfully and under her own power, to Tunis. That was quite an adventure, short version she left the desert in better shape than she entered it. Which says something about my bush mechanic skills and their lack of usage in our drive way. Once I have some more time I'll sum it up in more detail. Let's say I was close to burn her down in the dunes and call insurance! Luckily I didn't! Well, tomorrow it's back home at midnight, then she can relax in a cosy ferry garage for almost two days.
Well, next time I come here I'll bring all the spares and replacement parts, incl. paint, and have her redone. Garages can do anything here, given parts, if you have the time.
Anyways, it was realy nice!
Well, next time I come here I'll bring all the spares and replacement parts, incl. paint, and have her redone. Garages can do anything here, given parts, if you have the time.
Anyways, it was realy nice!
RangeRoller dt
Well-Sprung Member
- Posts
- 14,397
- Location
- Trapped inside my head @ LZ asylum
Thought it was easier/cheaper replace whole unit? Vibration is getting pretty bad got to be sorted before can think about new tyres. Do the axle seals just rip out/tap in?
That's called the axle, it is what keeps the wheels on the ground. Nark.
- Posts
- 4,655
- Location
- Rotherham
Scotiawhiskers
Well-Known Member
- Posts
- 878
- Location
- Manchester
When I was doing Otto's rocker shaft rebuild, I froze the shafts for several hours and also put the rockers in the oven at about 150C for half an hour too. Thermal differential made it much easier to get it all together.Make sure you put the joints in the freezer before you try to fit them Jack.
Gord Wedman
Well-Known Member
- Posts
- 617
- Location
- Chilliwack, British Columbia
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Thin walled socket it is then,I used a 9/16 AF ring spanner on my Classic prop nuts when the clutch went in France many years ago, sure I've still got it in the bottom of one of the tool boxes.
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
You mean the wheel bearing in the hub? New hub was about £200 when we did it. The Timken bearing was £70 but you need a press and bugger it up and you're on the way to £200 anyway.
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
- Posts
- 19,299
- Location
- Buckinghamshire, UK. ('95 DT)
JFC. They're about £7 here. You're not telling me there are no imperial prop nuts in the States and a cheap tool?!
To be honest, you're not missing much by not having the special tool. Still loads of clearance issues with it. You still have to rotate the prop shaft to get the bolts in the sweet spot. And the socket can get trapped under the u/j. I just use 9/16 open ended spanners.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
You forgot to mention that your nuts have rounded off and your knuckles skinned,over to you @Rubberknees .
- Posts
- 4,655
- Location
- Rotherham
Rounded off my nuts are none existent these days and as for-skinning over it just not me knucklesYou forgot to mention that your nuts have rounded off and your knuckles skinned,over to you @Rubberknees .
