Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Can you leave longer ones in ?You could always fit longer grease nipples,I did.
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
IMO No as they would be out of balance in the rotating UJ.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
She should have seen that coming..Some woman driving back to France got stung on a new pair of glasses from Specsavers
I guess they were in a case with a receipt and whatnot?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I did and they have been there for years. I've had Classics were the balance weight has rusted off and never noticed it.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
The second pair were.She should have seen that coming..
I guess they were in a case with a receipt and whatnot?
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
I was going to type
Can you leave longer ones in Al ?
But that sounded rude and there's enough of that on the last few posts already with nipples, grinding and long ones.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
I had longer ones in originally. They weren’t an issue and are easier to service and remove/install. Just grind the 2 sides if you have liccle ones. Only a shave! Tiny bit is all it needs.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I'll be turning over in a nice warm bed at that time.I set the auxiliary heater for 7;30 am tomorrow so its toasty warm when I leave for work @ 8;00
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Today I was going to track down the smell of diesel in the engine bay until the weather improved so spent the morning replacing a ridge tile that was blown off in the storm a couple of weeks ago. Found it in four pieces the morning we were flying out, the temporary fix worked thank God.Diesel leak job for tomorrow hope it's not the leak off pipes I only replaced them last month with expensive Gates pipe.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Heat shrink the ends. Slip it over, the heat of the engine will sup it on.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
It was very tight mate had to ease the end by pushing it on to a pair of long nosed pliers and quickly slide it on to the injector nipples before it tightened up. Tomorrow will tell.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Got gates on mine AND running rubber eating bio. Still ok after 4 weeks.It was very tight mate had to ease the end by pushing it on to a pair of long nosed pliers and quickly slide it on to the injector nipples before it tightened up. Tomorrow will tell.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Well I replaced them not so long ago and it's been standing for two weeks.we shall see.
Scotiawhiskers
Well-Known Member
- Posts
- 877
- Location
- Manchester
Got in, started him (a bit sulky), squeezed him out of the drive.
Superglued a temporary interior mirror in, leaving SWMBO's finger stuck to the tube until she peeled some skin off. Drove to the garage, put a couple of gallons of fresh unleaded in, then 'accidentally' got boxed on the wrong lane for the motorway junction so had to do an extra 10 miles there and back. on the way for the MOT station. Should have helped everything to settle and bed in, get the systems talking to each other and realigned under load.
Pulls smoother and more powerful, much quieter, nice drive, had forgotten how much of a magic carpet he is. Shame the EAS compressor is so noisy. Winter / spring jobs are compressor, solenoid block service and 4 new bags.
Now waiting on the garage result we they get an MOT slot free, maybe Thursday / Friday. Then we can enjoy the open road again.
Superglued a temporary interior mirror in, leaving SWMBO's finger stuck to the tube until she peeled some skin off. Drove to the garage, put a couple of gallons of fresh unleaded in, then 'accidentally' got boxed on the wrong lane for the motorway junction so had to do an extra 10 miles there and back. on the way for the MOT station. Should have helped everything to settle and bed in, get the systems talking to each other and realigned under load.
Pulls smoother and more powerful, much quieter, nice drive, had forgotten how much of a magic carpet he is. Shame the EAS compressor is so noisy. Winter / spring jobs are compressor, solenoid block service and 4 new bags.
Now waiting on the garage result we they get an MOT slot free, maybe Thursday / Friday. Then we can enjoy the open road again.
You need a remoteI set the auxiliary heater for 7;30 am tomorrow so its toasty warm when I leave for work @ 8;00
- Posts
- 4,653
- Location
- Rotherham
Longer nipples. I beg your pardonYou could always fit longer grease nipples,I did.
Moron
Well-Known Member
- Posts
- 1,796
I had one, it used to wash up, cook and make tea too , till it fecked orfYou need a remote
