biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
Me you num nuts, Davey duke
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
OLDUN
Active Member
- Posts
- 526
- Location
- in a valley with lots of grass
Today left it in the garage untouched - means it will last a day longer
biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
Refitted my centre box delete pipe not because I'm a hooligan and love the v8 sound, burbly on the over run etc but because iv long suspected iv got a blocked cat drivers sideside.
I'm getting a pulse threw the floor drivers side, on the motorway it seemed to struggle a bit and oddly enuf my drivers side door mirror would vibrate over 60 and the mpg went down. Now iv fitted the straight threw centre pipe mpg is back where it should be no more vibrating mirror and it goes like stink again not struggling at all.
The annoying thing is iv got new front down pipes sitting here but they have holes for 12mm o2 seasons and mine are 18mm sensors I will proberbly drill them out and tap them to take the 18mm sensors, it came with x1 sensor fitted12mm type. The other was damaged beyond use, bugger.
I'm getting a pulse threw the floor drivers side, on the motorway it seemed to struggle a bit and oddly enuf my drivers side door mirror would vibrate over 60 and the mpg went down. Now iv fitted the straight threw centre pipe mpg is back where it should be no more vibrating mirror and it goes like stink again not struggling at all.
The annoying thing is iv got new front down pipes sitting here but they have holes for 12mm o2 seasons and mine are 18mm sensors I will proberbly drill them out and tap them to take the 18mm sensors, it came with x1 sensor fitted12mm type. The other was damaged beyond use, bugger.
SpiggyTopes
Active Member
- Posts
- 218
- Location
- Portugal
Swapped the E Box cooling fan .... nice job, old one knackered!
Oddly, i've just taken the 'hooligan' pipe off & put the centre box back on. It was fun at first but coupled with the janspeed rear boxes it was getting too droney on the motorway. Seems smoother now & I can listen out for the next thing about to break!
biketeacherdave
Well-Known Member
- Posts
- 4,885
- Location
- south east london
Look at this on eBay http://www.ebay.co.uk/itm/251317510602
Just order a couple of these so should be able to modify the front cat pipes iv got sitting here then my centre box can go back on, iv got a 2 hour motorway round trip tomorrow drone drone will have to turn the stereo up a wee bit
Just order a couple of these so should be able to modify the front cat pipes iv got sitting here then my centre box can go back on, iv got a 2 hour motorway round trip tomorrow drone drone will have to turn the stereo up a wee bit
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
Last Monday replaced a mates P38 oil burner's blown rear air bag on the road side with a second hand one.
Yesterday replaced all 4 air springs, hockey stick bushes, drag links, ARB bushes and links (not sure about the britpart ANR1000 nuts lowered torque to 100nm as they don't seem to as good quality as the original LR ones) .
Today on my P38 V8 replaced the Heater matrix (replaced the o rings a couple of weeks ago but still leaky leaky)
So did the Audi A6 mod no more o rings and relocated my vaporiser so I can get to the spark plugs without spending a extra 10 mins unbolting it in the future.
Yesterday replaced all 4 air springs, hockey stick bushes, drag links, ARB bushes and links (not sure about the britpart ANR1000 nuts lowered torque to 100nm as they don't seem to as good quality as the original LR ones) .
Today on my P38 V8 replaced the Heater matrix (replaced the o rings a couple of weeks ago but still leaky leaky)
So did the Audi A6 mod no more o rings and relocated my vaporiser so I can get to the spark plugs without spending a extra 10 mins unbolting it in the future.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Probably metric instead of imperial too.
Rings a bell. Remind me what that is?
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
Replaced the heater matrix but instead of using a range rover one I fitted a Audi A6 one.
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
The nuts are the same M12 ( debateable 1.5 pitch) as originally fitted when built up in the factory.
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
This is the A6 matrix before I connected the hoses, managed to cut the old matrix so I could use the original fixings.
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
Discocrazy2
Member
- Posts
- 37
- Location
- Basingstoke
The cost of using a A6 matrix £19.99 delivered from Fleabay item number 371709409430 .
Also used
1.5 metres 16mm heater hose and 2x 19mm to 16mm hose reducer 4x 12-22mm Jubilee clips 2x 16mm to 27mm Jubilee clips and heat resistant sleeves to run the hoses in.
And 1/2 litre of anti freeze.
Also used
1.5 metres 16mm heater hose and 2x 19mm to 16mm hose reducer 4x 12-22mm Jubilee clips 2x 16mm to 27mm Jubilee clips and heat resistant sleeves to run the hoses in.
And 1/2 litre of anti freeze.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Bizarre. Don't remember any difference when I did my bags a few years ago. I usually hold parts side by side before fitting to make sure no mistakes when ordering.
- Posts
- 58,170
- Location
- Preston Lancs.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Bit difficult with air bags though as they as supposed to be fitted folded.
Didn't come that way! I remember struggling to fold them over before fitting.
