What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Had a small coolant leak from the throttle body heater plate since the new engine went in, guess things get disturbed so while the sun is shining thought i'd sort it out

martynv8-albums-p38-vogue-se-2002-picture17311-img-20150521-00611.jpg


New plate fitted & a good clean up of the throttle body

martynv8-albums-p38-vogue-se-2002-picture17312-img-20150521-00612.jpg


Hopefully that's the last of the leak.
 
tomcat59alan said:
Replaced leak off pipes (again) and the fuel cut off valve. Good job I had a new set of inlet gaskets because one was missing!!!!!
Click to expand...
If you used the over braided leak off pipe, melt the cut ends of the braid with a lighter to seal them. Stops fray back and I think will stop the tube end splitting as has happened twice on mine in a very short time.
 
Datatek said:
If you used the over braided leak off pipe, melt the cut ends of the braid with a lighter to seal them. Stops fray back and I think will stop the tube end splitting as has happened twice on mine in a very short time.
Click to expand...

I will try that Keith, thanks. I keep changing suppliers in case the pipe quality is different but they all seem to have a short working life.
 
tomcat59alan said:
I will try that Keith, thanks. I keep changing suppliers in case the pipe quality is different but they all seem to have a short working life.
Click to expand...
Amazing isn't it? My Transit has 158K miles and the leak off pipes are original and perfect, my P38 has 118K miles and I have replaced the leak off pipes 3 times in 6 years, first time with silicone pipe, not good as it stank of diesel despite no visible leaks, now two lots of pukka leak off pipes. Crap design again.
The melting trick makes a small collar so the pipe is a little harder to get on and hopefully it will stop the end of the pipe splitting. Only just done it so will have to wait and see if it improves things.
 
Yeah i had to replace the leak off pipes on my last one, bought the stuff from Island 4x4 and 3 months later it failed the mot on fuel leaking from engine.
At first the garage diagnosed leaking FP, then on investigation it was the leak off pipes that had swollen, garage changed them FOC for some stuff they swear by and all was good.
 
benthomas said:
Yeah i had to replace the leak off pipes on my last one, bought the stuff from Island 4x4 and 3 months later it failed the mot on fuel leaking from engine.
At first the garage diagnosed leaking FP, then on investigation it was the leak off pipes that had swollen, garage changed them FOC for some stuff they swear by and all was good.
Click to expand...

Can u find out what pipe they use because mine are becoming a service item.:)
 
Got her home. The drive is looking crowded again.

attachment.php
 

Attachments

  • brum brum.jpg
    brum brum.jpg
    214.8 KB · Views: 252
Not one for the purists but i fitted my RRS side steps to the DSE, quite a simple task in the end bit of cutting and welding all done in 2 hours.
Smartens it up and gives me the steps back for the kids.
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
494
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
712
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
790
Grrrrrr
Grrrrrr
Back
Top