What Cummins Engine should I use ???

L

lynall

Well-Known Member

Full Member

Posts

25,754

Location

Kent

• Jul 13, 2014

• #21

Iirc new euro6 4 pot is 350kgs and 6 pot was just over 450kg, just to give you an idea on weights
I seriously doubt Vosa would pay the slightest bit of attention
The common rail 4 and 6 pots are great tough little engines, very rare to see one in real trouble

 

tacr2man

Well-Known Member

Posts

3,927

Location

England

• Jul 13, 2014

• #22

lynall said:

Iirc new euro6 4 pot is 350kgs and 6 pot was just over 450kg, just to give you an idea on weights
I seriously doubt Vosa would pay the slightest bit of attention
The common rail 4 and 6 pots are great tough little engines, very rare to see one in real trouble

Click to expand...

Its DVSA now , and I think they would more so if you get pulled up at a road check , more likely if you were towing tho !

 

Disc300Series

Active Member

Posts

313

Location

NorthEast

• Jul 16, 2014

• #23

This would be nice - 2.8 Litre, does anyone know what SAE fitment the flywheel housings are on the Landrover Bell Housings ?

 

Attachments

• 
  2.8.JPG

  24.9 KB · Views: 206

Last edited: Jul 16, 2014

tacr2man

Well-Known Member

Posts

3,927

Location

England

• Jul 16, 2014

• #24

Disc300Series said:

This would be nice - 2.8 Litre, does anyone know what SAE fitment the flywheel housings are on the Landrover Bell Housings ?

Click to expand...

I doubt very much that they come under that system ! whatever engines ive fitted always needed a lot of mods in that area !!

 

Last edited: Jul 16, 2014

M

minimole23

Active Member

Posts

184

Location

Dorset

• Jul 16, 2014

• #25

I would fit the 6 pot, tonnes of power and a lovely sound.

 

Disc300Series

Active Member

Posts

313

Location

NorthEast

• Jul 20, 2014

• #26

I'm concerned about weight, My front springs are 2" lift and an extra 100kg but no good for a cummins engine that's over 3 times the weight of a 300tdi.

 

Langers

Well-Known Member

Posts

3,162

Location

Kent or Shropshire

• Jul 23, 2014

• #27

pressbrake said:

I forgot to say tyhat I somewhere have the dies to make one piece silicon rad hoses
I also made different lower rad pipe housing on the cummins to move the pipe and match rad output diameter

Click to expand...

Does this mean you're capable of making said hoses?
Would it be possible for you to do a set for a few beer tokens?