Weller wheels, centre hole too big?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

monomatic

New Member
Posts
4
Location
bristol, UK
I have picked up some steel Weller wheels to put on the defender, but I have found that the centre hole is larger than the hub:

weller.jpg

I thought all defender & D1 wheels were the same, maybe not?

Can I just add some alloy spigot rings like these on eBay?
(link just an example, haven't measured what exact size I'd need)

RRS to fit on Disco II.jpg

https://www.ebay.co.uk/itm/Land-Rov...d=121879369332&_trksid=p2047675.c100005.m1851
 
Last edited:
They look like my modulars, they are not centered by the hub but instead by the conical wheel nuts, as neilly says
 
Early 110s and 90s had a larger centre to the front hub. I've just had the opposite problem making sure I had the larger hole with my new alloys. You can't fit the later wheels on the early hubs without spacers. Or some doubtful wheel surgery.
 
TheQ said:
Early 110s and 90s had a larger centre to the front hub. I've just had the opposite problem making sure I had the larger hole with my new alloys. You can't fit the later wheels on the early hubs without spacers. Or some doubtful wheel surgery.
Click to expand...
Who told you this?
 
This forum informed me of the difference, just type in "110 early hub" in the search and all will be revealed...
+ Last week the tyre place fitted my new tyres to the wrong wheels which would not fit...( I was having a free coffee at the time.
 
Last edited:
You must log in or register to reply here.

Similar threads

MrGorsky
P38A BM CATS anyone?
Replies
18
Views
3K
MrMach2
M
meego
Clutch pedal spring assist
Replies
18
Views
3K
flat
flat
L
Anyone after a cheap webasto/eberspacher style heater?
Replies
8
Views
1K
lynall
L
M
where to get camshaft oil seal set parts
Replies
4
Views
1K
Michael Graber
M
SteveG4TRA
Ball-Joint-Separator kits from E Bay
Replies
2
Views
2K
kevstar
kevstar
Back
Top