well its out and now in!!
- Thread starter zen
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
was the 6.2 that ####ed? what happened?
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
in bits again tho?
wot da 6.2??
sold the turbo setup.
selling seperatly
ip.new
injectors.new
heads.excellent
flywheel and clutch.all new
lt95..SUFFIX A WITH light up diff lock and fill from top + o/d + adapter to 6.2
crank. rods and bearings..bearings new,crank a1
block..not cracked!!
still to wire up engine and steptronic auto and auto ecu..
still to make up headers and down pipes.
still to do make up trick autobox gearshift..ali rally/1/4 mile style
no dought ****e load more
oh fit lt230..(1:1)
but compared to wasting my time on the 6.2 i am quite happy to do above...only took 6 hrs to pull out and strip 6.2 and install 4.6 + gearbox..this compared to many many days it took to get the 6.2 to fit is a good sign in my book..just ashame the p38 headrers will not fit/not worth modding to fit.
sold the turbo setup.
selling seperatly
ip.new
injectors.new
heads.excellent
flywheel and clutch.all new
lt95..SUFFIX A WITH light up diff lock and fill from top + o/d + adapter to 6.2
crank. rods and bearings..bearings new,crank a1
block..not cracked!!
still to wire up engine and steptronic auto and auto ecu..
still to make up headers and down pipes.
still to do make up trick autobox gearshift..ali rally/1/4 mile style
no dought ****e load more
oh fit lt230..(1:1)
but compared to wasting my time on the 6.2 i am quite happy to do above...only took 6 hrs to pull out and strip 6.2 and install 4.6 + gearbox..this compared to many many days it took to get the 6.2 to fit is a good sign in my book..just ashame the p38 headrers will not fit/not worth modding to fit.
Last edited:
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
sell me that difflock switch cos ne1 fitting a 6.2 aint gonna care
bushwwacker
Well-Known Member
- Posts
- 6,154
- Location
- Here
What's gone in apart from a BFO supercharger?...
wangie46
Active Member
- Posts
- 963
- Location
- Lakeside Essex
Looking good zen,your gonna have trouble shutting that bonnet thou
Hurry up and get it running and get us a vid need to hear that beast
Hurry up and get it running and get us a vid
need to hear that beastWhat's gone in apart from a BFO supercharger?...
be more specific please....but did av perkins pile of pooh, so i decided to fit turbo 6.2 and do full chassis up resto...see thread one week to get this done...(ok that was opyimistic..lol)..that turned out to be a money pit of hell.(the 6.2)...
so now going with blown 4.6 but using diy conversion zf24eh from p38 mated to lt230.(read disc cutter on output shaft then drill and tap to take classic output extension).so giving me (once electronics sorted,well on way!) full sequential rally styley gear shifting (once i built gearshift/flappy padels) or at push of button full lazy auto..(and sport/eco modes etc)
Last edited:
Looking good zen,your gonna have trouble shutting that bonnet thou/quote]
disc cutter!!
wangie46
Active Member
- Posts
- 963
- Location
- Lakeside Essex
Looking good zen,your gonna have trouble shutting that bonnet thou/quote]
disc cutter!!
Good man like your style
bushwwacker
Well-Known Member
- Posts
- 6,154
- Location
- Here
bushwwacker
Well-Known Member
- Posts
- 6,154
- Location
- Here
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
well jell!
marccleave
Active Member
- Posts
- 644
- Location
- Dorset
