Weber Adapter Plate???

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
WURZAL THE LANDY

WURZAL THE LANDY

Active Member
Posts
455
Location
north ayrshire
any idea where i can get hold of a weber adaopter plate for my s3 cause the carb thats on has 4 bolts and my weber only has 2 or do i not need to worry will it just fit side ways?

cheers
 
hey Wurzal is it a 2.5 or 2.25 lump - is the Weber a 32/34DTML or not - coz my 2.5 32/34DTML has 4 bolt mounting to the inlet fannymould.
 
hmmm - not sure i understumble - yu have a 2.25 with a carb (solex) with 4 mounting bolt holes but a "new" Weber only had 2 mounting holes - is that right?
 
2 1/4 carbs are held on 2 studs so it sounds as if you already have a non standard carb on it. This probably means a none standard manifold. This in turn could lead to a non standard exhaust.
It sounds as if you problems are only just starting!
 
any compercunt person should be able to make yer a adapter plate fer it. bit of aluminium plate 3/8" thick. counter sunk holes to bolt to manifold and then yer holes to bolt to carb
 
as i sed before - my defender 2.5 petrol uses the Weber 32/34dtml carb with four bolt fixing - so yu can get the 2.5 inlet manifold and fit yo 4fixing carb straight to it.
 
You must log in or register to reply here.

Similar threads

P
Leak Carburettor 32/34 DMTL Weber - 2.5 litre 4 cylinder petrol engine defender.
Replies
4
Views
614
peter90
P
RP72
Fuelling issue......??
Replies
10
Views
876
RP72
RP72
styleruk
Weber replacement
Replies
16
Views
2K
Turboman
Turboman
T
Series 3 New Webber Carb
Replies
1
Views
531
kermit_rr
kermit_rr
dominicbeesley
2.25 exhaust manifold with 2.5 inlet
Replies
0
Views
1K
dominicbeesley
dominicbeesley
Back
Top