Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Nor me I wonder if its part of the injection moulding to keep the hole so to speak,so now there are plenty without a hole in eek wierd isn't it.
Water air lock
- Thread starter Grit Valve
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nor me I wonder if its part of the injection moulding to keep the hole so to speak,so now there are plenty without a hole in eek wierd isn't it.
aerofabrique
Active Member
- Posts
- 581
- Location
- UK
could be to prevent it snapping off during manufacture/shipping or something stupid like that.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
I jammed a drill bit in it you can push it untill flush and you can't pull it out a little more than what is showing but not right out I'm stumped meself like
I'm going to wait and see what the Oracle says
- Posts
- 58,170
- Location
- Preston Lancs.
I jammed a drill bit in it you can push it untill flush and you can't pull it out a little more than what is showing but not right out I'm stumped meself like
As long as it's clear and unobstructed. Maybe there to strengthen the plastic pipe but never seen one before. The plastic pipe is notoriously easy to break off.
- Posts
- 58,170
- Location
- Preston Lancs.
Talking of water just dropped me bloody iphone in the mop bucket. Had to strip the bloody thing down and dry it out. Up and running now.
Last edited:
- Posts
- 83,254
- Location
- Embasinga stocæ
yu are bloody lucky. most modern phones have a moisture detector on board which, when triggered, invalidates the warranty.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
I see what you mean but tube is not fixed so offers no strength I'm comming to the conclusion it's to stop the water flow eroding the plastic away like water to a cliff , oops with the phone, now you can't make dirty calls anymore
- Posts
- 58,170
- Location
- Preston Lancs.
Got it free anyway lad has them for business so i get his cast offs looks like i may need another one. Bugger.
- Posts
- 58,170
- Location
- Preston Lancs.
I see what you mean but tube is not fixed so offers no strength I'm comming to the conclusion it's to stop the water flow eroding the plastic away like water to a cliff , oops with the phone, now you can't make dirty calls anymore
Maybe. Got it going but white screen now hair drier for half an hour then try again. Bloody thing.
robcad1972
New Member
- Posts
- 31
- Location
- Isle Of Sheppey
Also make sure the hole is clear in the filler neck where bleed hose connects mine was blocked solid and was a pig to bleed til i cleared it.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Thanks already had done that by blowing from the rad end and watching the bubbles come out of the tiny pin hole located in the neck .
