Washer identification

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
THE BUDDAH

THE BUDDAH

New Member
Posts
686
Location
Romford essex
Hi,

After putting the front axle together im left with two washers, it would be rather cool if i knew where they should go...lol

Here they are:



Whos gona be the first to I.D them?
Or have i got me parts mixed up and they don't go on front axle?
They are about 3mm thick.
 
I changed a cv joint on mine a couple weeks ago. Stripped back to axle and never saw anything like them. That was on a 91 200tdi.
 
I took the suspension turrets off also and thought they might have gone ontop but they dont fit in the recess.....mmm, i wonder where they go?
 
RRRRRRRR yea RADIUS arm.
I'd better go and look. i only have the two, so one each side.

Well this is what they look like before i put them back on the disco so i one each side with the nut.


Thank you all for response....Jolly good show.

They are the only bits left after putting the axle back together, forgot the radius arms were tucked away in the corner.

SO..here is a smile from me.
 
Last edited:
You must log in or register to reply here.

Similar threads

Flat 6
Order of hard top corner fixings
Replies
1
Views
287
dag019
dag019
currymunster
Disco 1 Front shocks
Replies
16
Views
1K
frostythor
frostythor
proto57
Freelander 2 (LR2) Baffling (to me!) front Half-shaft/Axle Length Mystery! Too short, twice???
Replies
10
Views
860
Zorro587
Zorro587
lightning
Value me this 110
Replies
17
Views
835
Knappster
Knappster
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
Back
Top