warning lights on dash!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

scurrie

New Member
Posts
12
Location
Dumfriesshire
hi there ,can anyone help . I have got 3 warning lights on the dash of my newly purchased disco 2 52plate that wont go . they are TC light down hill decent and ABS . is it a simple fix or a long drown out process . cheers
 
welcome to the amigo club im in the same boat as you at the moment just waiting on a diaganostic plug in so that I can put it right
 
A quick check whilst you're waiting for a diagnostic plug in: Jack each wheel up and try & wobble it at 12 & 6 and 9 & 3 o'clock positions. Also rotate the wheel too: Any wobble or roughness will point to that wheel hub needing replacement and it will most likely be the one causing an ABS sensor fault (NOT ALWAYS, BUT LIKELY). The ABS sensor fault brings up the 3 amigos because all 3 systems work off sensing wheel speeds. Easy fix is replace the offending hub... Definitely replace a hub if there's play in it regardless of an ABS fault ;)

It might also be the ABS shuttle valve sensor fault - a relatively easy wiring fix sorts that one out.
 
Just check that the abs sensor wires are still connected at the plugs, clipped into a little bracket on the chassis
had this on mine this weekend, must have over extended the cable and pulled the plug apart.
dash lit up like xmas tree
plugged back together and all lights off again
hth
rick
 
Back
Top