Want to Convert ace to non ace on my RR l320 3.6 sport

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
K

konrad

New Member
Posts
2
Hi Guys

& thank you admin for allieingbme to join

My question please ... I'm in thr process of removing my ace and converting to non ace

I've sourced pre owned Disco 3 sway bars front and rear and purchased new all the poly D bushes and decent quality drop links ready to do the job

I understand I will need a new aux belt for when I remove the ace pump and enabling me replace with a shorter belt

DOES ANY ONE KNOW THE PART NUMBER OF THE AUX BELT I WILL NEED PLEASE ?

Also can any one please confirm that I've purchased the correct parts and compatible for the conversion?

Many thanks again ....
 
kermit_rr said:
Why do you want to remove the ace?
Click to expand...
Severely rusted pipe work , leaky block suspect front anti sway bar failure ,
Whilst all of the above can be repaired the cost to do so out weighs the value as its simply a work horse used for towing a trailer and horse box
I've fortunately sourced non ace sway bars and a bush kit for less then a third of of the price of the ace parts and so that can keep the bus working
Decision based simply on economics.
 
konrad said:
Hi Guys

& thank you admin for allieingbme to join

My question please ... I'm in thr process of removing my ace and converting to non ace

I've sourced pre owned Disco 3 sway bars front and rear and purchased new all the poly D bushes and decent quality drop links ready to do the job

I understand I will need a new aux belt for when I remove the ace pump and enabling me replace with a shorter belt

DOES ANY ONE KNOW THE PART NUMBER OF THE AUX BELT I WILL NEED PLEASE ?

Also can any one please confirm that I've purchased the correct parts and compatible for the conversion?

Many thanks again ....
Click to expand...
Hi konrad, I am in the process of doing exactly what you have done with Disco 3 sway bars. Could you please tell me which drop links you used for the front?
 
As a side note plse don’t forget that ur insurance will have to be informed as ur altering a factory fitted item

Plus not sure if u will get any dashboard warnings
 
If your ace pump was in good order and off a petrol I would have bought it as a spare so you could recoup some of the costs of conversion. You will also need to adjust the ccf file in your car to non ace or the dash will light up light an Xmas tree and won't pass its mot.
If you need any more advice on parts just ask
 
biketeacherdave said:
If your ace pump was in good order and off a petrol I would have bought it as a spare so you could recoup some of the costs of conversion. You will also need to adjust the ccf file in your car to non ace or the dash will light up light an Xmas tree and won't pass its mot.
If you need any more advice on parts just ask
Click to expand...
 
Hi, I have all of the parts except suitable front drop links. Just not sure what spec would be required to suit the D3 bar and RRS top arm. The TDV8 Ace pump, valve block and front ARB are all in good working order...
 
Last edited:
You must log in or register to reply here.

Similar threads

M
Sport ACE bypass for RR Sport 4.2 Petrol SC
Replies
10
Views
1K
mikesavva
M
M
Range Rover Sport L320 Ace Leak Rear
Replies
4
Views
3K
gstuart
gstuart
P
D90 Hard to soft top conversion questions
Replies
10
Views
852
Peio
P
SootScout
I recorded over 200 trips on my 2017 Discovery Sport to find out if its DPF is fit for purpose
2 3
Replies
44
Views
2K
Plasser
P
Blob
L322 Fixed! - P0046 - Where is the boost control solenoid?
Replies
17
Views
3K
Grrrrrr
Grrrrrr
Back
Top