Waist seal on exterior of window. Missing something?

gees a push · Nov 2, 2018

Am I missing something here?
I can’t seem to get the waist seal to sit properly. Doesn’t look anything like the one on the passenger door...

Discokids · Nov 2, 2018

There's no lip, have you re-skinned the door?

Discokids · Nov 2, 2018

Just left Glasgow too, or I'd have come and had a gander.

gees a push · Nov 2, 2018

Discokids said:
There's no lip, have you re-skinned the door?

No this is how I got it. So I’m clueless.

Discokids · Nov 2, 2018

gees a push said:
No this is how I got it. So I’m clueless.

If you look at the door skin, as it folds, behind that is a steel section front to back, made of two pieces spot welded together. Pull the skin away slightly you will see the steel sections turns out towards you about 10/12mm down. The fold on the skin should sit on this with the steel sticking out upwards 10mm or so, for your seal to clip onto.

Waist seal on exterior of window. Missing something?

gees a push

Member

Discokids

Well-Known Member

Discokids

Well-Known Member

gees a push

Member

Discokids

Well-Known Member

Similar threads