Gazbo
Well-Known Member
- Posts
- 3,949
Been looking at my mates '97 300Tdi Disco to do a few fixes, got it all done except for a high frequency vibration between about 95 and 110 kph. He has been down the wheel balance trail, that was of no use, I have removed both tailshafts in turn and checked uni's, rubber coupling etc, running true, balance weights not missing etc, then driven with only the rear shaft in, front shaft out, then vise versa, the rear tailshaft spigot/pilot bush within the rubber "donut" coupling was worn a bit so I rebuilt the pin diameter up and re-machined to a neat fit within the tailshaft bushing which seemed to slightly decrease the vibes but it's still there, checked the exhaust system mounts and cannot see anything that would give this "buzz" at speed, it's definitely a high frequency, (driveline/engine speed).
I'm wondering if it could be an engine mount collapsed, (they all look ok), or the harmonic balancer, anyone with knowledge of similar problems and or possible fixes.
I'm wondering if it could be an engine mount collapsed, (they all look ok), or the harmonic balancer, anyone with knowledge of similar problems and or possible fixes.