vent seals
- Thread starter norried
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
I use gutter sealant a lot as its black and stays a bit soft so you can get things apart. Evostick is very hard to get right and it dissolves in petrol.
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
I used super glue. I'm not planning on replacing them again in my lifetime but they were a bit of a pain to get to sit correctly.
Col
Col
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
evo stick for me. it worked 
I plan on keeping mine long enough that I will have to replace everything more than once!
nickjaxe
Well-Known Member
- Posts
- 821
- Location
- North Cheshire/Merseyside
I also used black silicon....stuck em on and clamped down over night with the vent itself.
exactly the same method I used.
Tall Ratbag
Active Member
- Posts
- 167
- Location
- Midlands
It's much easier to fit the later type of seal which fixes to the vent flap using self adhesive.
tottot
Well-Known Member
- Posts
- 8,031
- Location
- west wales coast
Do not get the open cell type foam ones,they hold water and promote rust.
