VCU support bearing bolts

Cookie55 · Nov 17, 2014

I've just got a reconditioned VCU from Bell engineering (really helpful) and now need to refit .
However when the prop shaft assembly was taken off I put the support bearing bolts in a safe place - so safe I can't remember where! Am I right in thinking they were a specialised bolt? Can anyone help with a part number or where I can get suitable bolts?

nickcc · Nov 17, 2014

If I remember correctly they are a large diameter bolt with a small head, probably dealer only but you could give Bells a ring first.

Cookie55 · Nov 19, 2014

Thanks for suggesting Bells. However I think I can contact someone locally who works with Freelanders

dave21478 · Nov 19, 2014

The two bolts that hold each support bearing to the floor? They are nothing special - just find something that fits the thread. M8 possibly. Use a washer under the head if needed.

Irishrover · Nov 19, 2014

dave21478 said:
The two bolts that hold each support bearing to the floor? They are nothing special - just find something that fits the thread. M8 possibly. Use a washer under the head if needed.

:behindsofa:

^^^^Like he says...I am pretty sure that they are M8 with a flanged head (10mm a/f socket). They are quite long, around 50mm from memory. No problem using M8 standard setpins (13mm a/f hex. head) and washers.

Cookie55 · Dec 1, 2014

Cheers guys for your help - I think I'll try and get some M8 bolts

VCU support bearing bolts

Cookie55

New Member

nickcc

Well-Known Member

Cookie55

New Member

dave21478

Active Member

Irishrover

Well-Known Member

Cookie55

New Member

Similar threads