Valley Pan Gasket 3.5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Locky1978

Locky1978

Active Member
Posts
583
Location
Farnham, Surrey
I've got to replace my valley pan gasket as I've got an oil leak coming from the front seal and clamp.
I'm unsure wether to use a composite or tin gasket. I've heard composite seal well but can break down on the lifter side. The tin ones don't have this problem but they can be troublesome to seal.
Has anyone got any experience of the two?
 
Composite will seal better, remember small amount of instant gasket in corners.

also check for signs of lifting/bulging indicates head gasket
 
Right-o I might order up a composite one then.
Have you ever seen this happen to them?
 

Attachments

  • Screenshot 2014-05-26 18.10.26.png
    Screenshot 2014-05-26 18.10.26.png
    319.1 KB · Views: 241
Is it really worth the risk of the 'black ****' lifting then? Personally I'd rather go through tin gaskets and redoing it until it seals than the risk of any nasty black stuff doing nasty things to my engine.
 
the black **** is on the tin gaskets..not composite.its paint.
 
Ah I see.... thats where I'm getting confused. I thought that pic was a composite gasket gone bad. De-laminated as such. Which is why I was wary of fitting it.
 
marccleave said:
Painted tin gasket... Whhhaaaaattttt?
Click to expand...


yes..they are coated with paint or similar..they aint tin after all but cheap steel...steel rusts, and as top is open to elements they are coated. (both sides..and it falls off after time)
 
You must log in or register to reply here.

Similar threads

A
P38A Valley gasket replacement - any RTV?
Replies
5
Views
1K
AndyF07
A
D
P38 4.6l gems blown head gasket
Replies
19
Views
2K
pwood999
pwood999
htr
Freelander 1 K-series 1.8 Fly wheel
Replies
11
Views
844
htr
htr
Seph98
Turbo Hoses with oil
Replies
7
Views
767
miktdish
miktdish
AH-4x4
Help ending my leak - 200TDI
Replies
10
Views
555
AH-4x4
AH-4x4
Back
Top