V8 Manifold Series 2A

Shortcut · Jan 4, 2021

I am after some advice on the best solution regrading how to adapt the steering box using a Rover v8 in a series 2 as the manifold does not have any clearance.

The manifold is off a discovery 3.9, not sure if I need to use a different manifold set up.

Any help would be greatly appreciated.

adrian hogg · Jan 6, 2021

years ago I fitted a manifold from a Rover P5B coupe but you may struggle to find a good one now

Wildefalcon · Jan 6, 2021

What does the steering bar fit? Is it over the chassis rail? What, exactly, fouls?

Shortcut · Jan 20, 2021

Thank you for the replies, the steering bar sits over the chassis and the track rod end fouls the manifold. I have attached another photo taken from the top to show the manifold and the steering arm. It looks like I need a different set up.

Wildefalcon · Feb 2, 2021

Could you use a shorter tre end and nut? It's a shame you couldn't use a straight arm, it would give you clearance and space for a heat shield

Hicap phill · Feb 2, 2021

I may sound mad... but are the manifolds handed? Could you swap over & this moves the flange forward?
I can’t remember how I done it it’s been 30+ years ago

norseman · Jun 4, 2021

If it's any help, the Range Rover classic V8 uses different manifolds L & R
I assume the Disco set-up is identical as the chassis is effectively the same as the RRC.

V8 Manifold Series 2A

Shortcut

New Member

Attachments

adrian hogg

Well-Known Member

Wildefalcon

Well-Known Member

Shortcut

New Member

Attachments

Wildefalcon

Well-Known Member

Hicap phill

Well-Known Member

norseman

Well-Known Member

Similar threads