minimental
New Member
- Posts
- 10
Hi guys
i have recently replaced my 3.5 carbed v8 with a 3.9 hotwire injection engine, which was running fine
today i changed the plugs, leads, dizzy cap and rotor arm and it will not start at all,
it cranks over fine for a few seconds but seems to bog down and then crank over freely again
Any ideas?
thanks
Reuben
i have recently replaced my 3.5 carbed v8 with a 3.9 hotwire injection engine, which was running fine
today i changed the plugs, leads, dizzy cap and rotor arm and it will not start at all,
it cranks over fine for a few seconds but seems to bog down and then crank over freely again
Any ideas?
thanks
Reuben