- Posts
- 83,282
- Location
- Embasinga stocæ
If it's a doozie it don't need power to run. If ignition switch plug is removed it should be ok. Possibly remove starter relay - Lhs side footwell ?
Urgent!!!
- Thread starter Mudman88
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
Should work as far as I'm aware (which int very)
Would have headlights but not indicators I think
- Posts
- 83,282
- Location
- Embasinga stocæ
Do we know if it's 200 or 300?
Lights don't go throw ignition
Lights don't go throw ignition
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Evening. Just got message from MHM.
I can help in the morning, on call tonight and can't venture over.
If you want me it's best to text me so get the number of one of the LZIR admin boys.
I can help in the morning, on call tonight and can't venture over.
If you want me it's best to text me so get the number of one of the LZIR admin boys.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,106
- Location
- Gloucestercotshirewolds
- Posts
- 83,282
- Location
- Embasinga stocæ
Title is "urgent"
How urgent is that? Can yu camp another day or so?
How urgent is that? Can yu camp another day or so?
- Posts
- 83,282
- Location
- Embasinga stocæ
Wot tools yu got to remove steering shroud?
- Posts
- 10,639
- Location
- Oxfordshire
there's not enough info.
check the wire from the pos bat to the starter motor.. has that melted and shorted against something? if so, use a jump cable as a temp fix.
if that isn't the case, wait until daylight. remove the pos bat term. run a thin guage wire from the pos bat to the fuel solenoid.
bump it and drive home.. being very careful as you have no lights for anything.
or if you can't bump, jump leads from pos bat to starter and short the small spade against the big lug.. it'll spark and make sure it's not in gear. also, make sure the short isn't futher up else you'll melt the jump leads.. you'll tell as they'll get hot.
check the wire from the pos bat to the starter motor.. has that melted and shorted against something? if so, use a jump cable as a temp fix.
if that isn't the case, wait until daylight. remove the pos bat term. run a thin guage wire from the pos bat to the fuel solenoid.
bump it and drive home.. being very careful as you have no lights for anything.
or if you can't bump, jump leads from pos bat to starter and short the small spade against the big lug.. it'll spark and make sure it's not in gear. also, make sure the short isn't futher up else you'll melt the jump leads.. you'll tell as they'll get hot.
- Posts
- 83,282
- Location
- Embasinga stocæ
Mudman88
Active Member
- Posts
- 104
- Location
- Atherstone
It starts with no keys in the ignition ! When I hold the fuse in but make a grinding
Noise while ticking over .
Noise while ticking over .
- Posts
- 83,282
- Location
- Embasinga stocæ
starter motor is running all the time. Remove the small wire from the starter motor and report back
Mudman88
Active Member
- Posts
- 104
- Location
- Atherstone
If it sounded ok I would drive it .
- Posts
- 83,282
- Location
- Embasinga stocæ
got a fire extinguisher?
hey, maybe take the fuse out after it starts?
- Posts
- 83,282
- Location
- Embasinga stocæ
that is what i am suggesting, but he needs to check if the starter doesnt run with solenoid wire removed. (or relay)
- Posts
- 83,282
- Location
- Embasinga stocæ
scotty281976
Active Member
- Posts
- 182
- Location
- STOKE-ON-TRENT
ive only just managed to get on lz, im only 22 miles away from you, has anyone said they are coming to help
- Posts
- 83,282
- Location
- Embasinga stocæ
no-one yet till tomorrow.
scotty281976
Active Member
- Posts
- 182
- Location
- STOKE-ON-TRENT
is it just a case of repair the starter wiring, replace 2 fuses and jobs a goodun by the sounds of it
