Disco 2 Urgent anti roll bar link help please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

KNine

Active Member
Posts
149
Location
Salisbury Plain
Friend has mot re test tomorrow. We are fitting rear anti roll bar links x 2. He took one end off last night but drove to me tonight. Now the two links are our of sync. How do we get them both level to re fit links. Is this an ACE thing??
Thanks in advance
 
Bit difficult to photo, the D2 anti roll bar seems to have hydrolics on one side, so when you line up one side to fit a drop link, the other side will not mate up to fit the other drop link. The instinct is to pull the dar down, but the pressure in the hydrolics stops this. I imagine we have to release some hydrolics pressure?
 
Bit difficult to photo, the D2 anti roll bar seems to have hydrolics on one side, so when you line up one side to fit a drop link, the other side will not mate up to fit the other drop link. The instinct is to pull the dar down, but the pressure in the hydrolics stops this. I imagine we have to release some hydrolics pressure?

Is yours fitted with ACE?
 
From RAVE

arb.jpg


Top right picture has drop link in it
 
Friend has mot re test tomorrow. We are fitting rear anti roll bar links x 2. He took one end off last night but drove to me tonight. Now the two links are our of sync. How do we get them both level to re fit links. Is this an ACE thing??
Thanks in advance
jack up the other side, might need to undo one of the caps on the ram pipes to let a little oil out
 
Thanks Bigeeee for rave. Problem now solved. My mate read about releasing pressure somwhere on web.
So thanks all, all will be done in 10 minutes
 
Back
Top