tyres

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mal4936

mal4936

New Member
Posts
78
Location
gateshead
cooper discovery stt 265,s will they be ok with standard width arches what they like for rubbing on inside anyone know cheers
 
baggyjim said:
welcome to landy zone but use the search button ffs:doh:
Click to expand...
tried the search but nothing about discovery's .that's why i asked different makers seem to make tyres of a certain size and some fit ok others don't .
but thanks for the advice anyway
 
mal4936 said:
tried the search but nothing about discovery's .that's why i asked different makers seem to make tyres of a certain size and some fit ok others don't .
but thanks for the advice anyway
Click to expand...

sorry bud , as above ^^^^^^^^^^^^^^^^^^ should be fine
 
Last edited:
19MART82 said:
they wont catch the arches but you'll need 30mm offset to stop them rubbing on the radious arms
Click to expand...
cheers . 90 is lifted anyway was more worried about rubbing inside. wheels on offer with the tyres have 30 mm offset. normally use 235's so just wanted to know how much hassle it could bring before i ordered them
thanks
 
265's are fine on a standard 90 so should be even better on a lifter one - i have 265's on mine no probs! Sorry, woulda saved you all the hassle if i'd spotted it earlier, was too busy talkin wine!
 
I had 265/70/16 on me 90 no Lift on deepdish steel modulars. and never needed any spacers?? yes they rubbed on full lock but I simply turned the wheel slightly the other way when I heard em rub. and that seemed to cure the problem. :doh: I suppose I could have altered steering stops. but couldn't be arsed with it.
 
redhand said:
I had 265/70/16 on me 90 no Lift on deepdish steel modulars. and never needed any spacers?? yes they rubbed on full lock but I simply turned the wheel slightly the other way when I heard em rub. and that seemed to cure the problem. :doh: I suppose I could have altered steering stops. but couldn't be arsed with it.
Click to expand...

Mine are on **** boost alloys which i think are not very deep so should be OK!
 
You must log in or register to reply here.

Similar threads

hawky666
power steering pump upgrade advice please
Replies
5
Views
937
lynall
L
hawky666
How to determin correct offset needed with wider arches??
Replies
4
Views
938
Ollie_Mif
O
L
another wheel et thread
Replies
0
Views
406
lockitup
L
MacStu
LT95 mainshaft wear
2
Replies
21
Views
1K
dag019
dag019
MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
1K
miktdish
miktdish
Back
Top