Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
P38's never had an option for steel wheels.
P38A Tyre recommendations for a P38a Range Rover please
- Thread starter tank93
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,628
- Location
- Sud ouest France !
Very true Mr _b!
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I had 235 on mine when I got it with snow tyres. Never noticed much difference. Tread pattern makes most difference in my experience.
- Posts
- 58,170
- Location
- Preston Lancs.
Very early ones did.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Nope the very early examples were fitted with either Stratos, DKL, or the 3 spoke "Vogue" copies which were fitted to the base models.
- Posts
- 58,170
- Location
- Preston Lancs.
Ok carry on you know best. As far as i know early ones had steel spares. So steel wheels could be fitted.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
You can fit steel wheels, but they never came with them..
- Posts
- 58,170
- Location
- Preston Lancs.
They were listed as an option on early Microcat the up to date issue does not list them.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Two of mine came with steel spare wheels.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Hmm they might of made a mistake, hence removing it from the update.
- Posts
- 58,170
- Location
- Preston Lancs.
No mistake. They were listed for the P38. 7 J WITH 235/70/16 tyres.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Hmm..
the 16' 3 spoke alloys were the only option for the base models.
According to the brochures and the Book I have here there was never a steel wheel fitment option,
- Posts
- 58,170
- Location
- Preston Lancs.
They were listed on the parts manual as an option. Not a lot more i can say about it.
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
My spare is a steel
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
My spare is an alloy of the set. It has a 255/6516 road tyre on it so may not work if I ever need it.
- Posts
- 58,170
- Location
- Preston Lancs.
Steel 7J/16 road wheels were available for the early P38 from Land rover. Fitted with 235/70/16 tyres. Similar to the steel wheels available for the Disco 1 listed for soil use.. They are no longer listed on Microcat for the P38. They are still listed for the Disco 1 on Microcat, but are no longer supplied by Land rover, but are aftermarket units.
