Tyre pump
- Thread starter bongo1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
norseman
Well-Known Member
- Posts
- 3,259
- Location
- Essex - UK
I can't be bothered with battery leads or cigar lighter plugs for that matter & used my late father's 1940's brass bodied foot-pump for several years until age got to my leg muscles
We have two cars, including a RRC & these days I use a cordless pump, Li-Iron battery which will top up all eight tyres on one charge & a proper 'screw-on' valve connector, as opposed to the usual stupid lever type. Bought on the 'bay for £35 with free postage.
We have two cars, including a RRC & these days I use a cordless pump, Li-Iron battery which will top up all eight tyres on one charge & a proper 'screw-on' valve connector, as opposed to the usual stupid lever type. Bought on the 'bay for £35 with free postage.
bongo1
Active Member
- Posts
- 462
- Location
- MACCLESFIELD cheshire
Thanks norseman i will check them out . And thanks Knappster its reassuring to know the T-MAX are ok . How big are they , pictures dont really show actual size .
brian47
Well-Known Member
- Posts
- 8,867
Regarding connections to the battery as @norseman mentioned. What I did with mine was to fit a 12S (the grey one) trailer socket and OK, I had to uprate the fuse a bit too so that I can pick up 12 volts on the secondary trailer socket. Obviously an Anderson socket would be better, but IMO that's a bit of overkill just for a tyre compressor, and anyway so far I haven't had any problems.
norseman
Well-Known Member
- Posts
- 3,259
- Location
- Essex - UK
Just don't buy the cheapest you can find, what usually fails on these devices is not the battery or the motor but the compressor itself. You can get to the stage when the thing is still belting away but putting less & less air into the tyre. Sadly like most things no matter what you pay chances are it will be made in the far East. The old saying 'you get what you pay for' doesn't hold up so well these days
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Just tried mine out, as shown in previous post.
Std D2 tyre, from 12PSi up to 38 Psi in 4 minutes.
Not the fastest, not the slowest, and not too noisy, just do not use it late at night or in the morning unless you hate your neighbours.
Cheers
Std D2 tyre, from 12PSi up to 38 Psi in 4 minutes.
Not the fastest, not the slowest, and not too noisy, just do not use it late at night or in the morning unless you hate your neighbours.
Cheers
bongo1
Active Member
- Posts
- 462
- Location
- MACCLESFIELD cheshire
I've taken the plunge and gone with the T-Max 70 LPM @ 30psi BA2663 , I have been looking at them on and off for some time now , But needed everyone's help in deciding to go for it .
brianconwy
Well-Known Member
- Posts
- 1,112
- Location
- conwy, north wales
This was the one I wanted - https://www.paddockspares.com/double-pump-hd-portable-air-compres.html
But the one I got was a Katsu one similar to the one in Neilly's picture. Quite impressed except for the screw on attachment is fiddly.
But the one I got was a Katsu one similar to the one in Neilly's picture. Quite impressed except for the screw on attachment is fiddly.
bongo1
Active Member
- Posts
- 462
- Location
- MACCLESFIELD cheshire
The T-MAX has the same fiddly end . Instructions are a bit naff , in the book it says start pump and then connect to tyre , on the box it says connect to tyre first . I can only guess what it means is start pump if its getting upto its max 150psi to relieve the strain . Will try it out tomorrow and see what it dose .
brian47
Well-Known Member
- Posts
- 8,867
If its any help, I connect mine to the tyre first then start the compressor. When finished, I do the reverse, stop the compressor then disconnect from the tyre.
The screw-on valve connector is a bit fiddly but you'll soon get used to it.
bongo1
Active Member
- Posts
- 462
- Location
- MACCLESFIELD cheshire
Thanks brian47 , i tried it today your right it is a bit fiddly . The wire could do with been longer to reach round better , the springy pipe is long enough to reach all round but you have to keep running back to the pump so sort of defeats the object , guess i will suss it out , pass it underneath to the o/s maybe best . The pump itself seems very good , happy with it .
