Tyre pressure minefield! ! Does anyone know the answer?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bushcrusher

Bushcrusher

Active Member
Posts
282
Location
Dorset near the sea
Hi guys, do any of you know the answer to my question? I run 265x75x16 bf goodrich all terrain mud tyres on steel rims, on my discovery 1 v8 3.9. I've been told and read that the following are exceptable on a 4x4 in the following surface types
Road= 30 to 32 psi
Gravel= 26 to 32 psi
Rocks= 22 psi
Mud = 28 psi
Sand= 16 psi
Are these correct or is it more mumbo jumbo made up by a pencil neck who's closest off road experience was walking on the grass! So has anyone got the same tyres on and what pressures do you run on road and off? Tyres are bleeding expensive so don't want them to wear out before they've done 400 miles or so.
So I'm all ears
Dave
 
reference driving on the orad, have a seach for the chalk test.

I run my 285 75 16 BFG MT at 30 on everything , seem to work OK.

Cheers
 
Bushcrusher said:
Cheers for that, the chalk test? Is that the one where you mark a line across the tyre and if wears evenly you have correct psi?
Dave
Click to expand...

Yep, that is the chalk test.

The orad is a special item only available for Discovery owners who are in the club and know the speshul wink and nod routine..

If you have to ask....then......:p:p.

Cheers
 
OK fella really appreciate your response I will give it go . And do the chalk test neilly mentioned. I had heard of it before, but due to old age setting in andiscovery a crap memory since I high sided my hayabusa and landed on me head back in 2009 me not remember much. What we talking about anyway?
 
Well, that was fortunate.

Just went and checked, all at 30PSI, but on undoing one of the caps I could hear air escaping, seems the valve was right on the edge of being tight and had come a little loose when I removed the cap.

So after a search for the valve tool I know I have and not being able to find it, off to halfords £6 lighter for a valve tools and a 4 pack of valve cores just in case. Now I need to put air in that corner....LOL.

Cheers
 
That was lucky m8, Jesus I've had similar happen to me on a rice rocket. And it 2 as the bloody front one. All I can say is thank you to that cow who gave it's life to save mine!
Now you know why I've gone to 4 wheels instead of 2.
 
Somebody mentioned reducing the pressures on snow or mud. That's not advisable because of what happens to the tyre at the bit that really matters, the bit in contact with the ground. The tread can start to go concave and the tread pattern can close up thereby reducing the efficiency of the tyre.
Proof that the tread of the tyre does actually go concave can be seen when a tyre which has been under-inflated wears the tread on both outside edges of the tread.
Tyres for normal vehicles should be operated at either the manufacturer's specified pressures or the pressure found by experimentation using a technique such as "the chalk test".
The myth about reducing the tyre pressure came about after those Icelandic off-roaders were seen doing just that on a snowfield, but if you check carefully the tyres are more like balloon type tyres with tractor tyre tread patterns which probably normally operate at pressures of 10 to 15 psi.
 
You must log in or register to reply here.

Similar threads

LandySurf
Tyre Pressure - BF Goodrich KO’s - TD5
Replies
7
Views
3K
300bhp/ton
300bhp/ton
Freddie17
Tyre sizes
Replies
11
Views
2K
300bhp/ton
300bhp/ton
fatdisco
Tyre pressure fl2
Replies
0
Views
903
fatdisco
fatdisco
dinisrosa
Defender td5 10P - no air pressure
2
Replies
38
Views
4K
dinisrosa
dinisrosa
landy-lee
BFG KM3 vs KO2 ?
2
Replies
23
Views
6K
rob1miles
R
Back
Top