Disco 2 Typical

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
meego

meego

Well-Known Member
Posts
10,895
Location
Caledonia
The snow is here and we had around 5/6 inches last night. The wife had the Disco at work yesterday and on the home we have been visited by our three friends. Not the Wise Men......the other three F----RS :mad::(
Two rear hubs now ordered from Island 4x4.
 
Gold ( you have to pay), Frankie's sense (i.e.none) and Myrrhder to have to fit the new hubs in the snow.
:mad::mad::mad::mad:
Do wonder why the three amigos didn't show up in normal driving!
Double :mad::mad::mad::mad:
 
upload_2020-12-4_22-34-5.jpeg
 
Hubs came today. Brilliant service from Island 4x4
I’m wondering now if I even needed the hubs. There’s is a note in the box about it needing a “Long Lead” if it’s a Sensor fault. My Nano showed a left rear sensor fault and I automatically thought hub. Anyone got any info on this long lead thing ? It seems to do away with the joint plug from what I’m reading !!
 
meego said:
Hubs came today. Brilliant service from Island 4x4
I’m wondering now if I even needed the hubs. There’s is a note in the box about it needing a “Long Lead” if it’s a Sensor fault. My Nano showed a left rear sensor fault and I automatically thought hub. Anyone got any info on this long lead thing ? It seems to do away with the joint plug from what I’m reading !!
Click to expand...

Never heard about a lead that removes the joint plug, only difference ref length I know iirc of is that the rears have longer leads than the fronts.

Cheers
 
neilly said:
Never heard about a lead that removes the joint plug, only difference ref length I know iirc of is that the rears have longer leads than the fronts.

Cheers
Click to expand...
These don’t look any longer than the ones on the front !!!
I’ve done three on the front but never a rear yet. I’ll have a look at Rave and see what it says.
 
meego said:
These don’t look any longer than the ones on the front !!!
I’ve done three on the front but never a rear yet. I’ll have a look at Rave and see what it says.
Click to expand...

I may have got it backwards and the front is longer than the rears, I no longer have my spare parts to check.

It would make sense this way as it used to be a case of having an o ring for the rear with a front hub kit as that had the longer cable. So covered for all eventualities. My bad.

Cheers
 
neilly said:
I may have got it backwards and the front is longer than the rears, I no longer have my spare parts to check.

It would make sense this way as it used to be a case of having an o ring for the rear with a front hub kit as that had the longer cable. So covered for all eventualities. My bad.

Cheers
Click to expand...
No bad on your part mate. I’ll find out tomorrow though as it’s supposed to be a dry day and I’ll get these done.
 
meego said:
No bad on your part mate. I’ll find out tomorrow though as it’s supposed to be a dry day and I’ll get these done.
Click to expand...

Good luck, I assume on the new hubs you have checked the nut size and have a socket for it.

Some of the aftermarket hubs have bigger nuts. If you are just changing the sensor, then I hope they come out for you, I had one that would not budge.

Cheers
 
neilly said:
Good luck, I assume on the new hubs you have checked the nut size and have a socket for it.

Some of the aftermarket hubs have bigger nuts. If you are just changing the sensor, then I hope they come out for you, I had one that would not budge.

Cheers
Click to expand...
All good on the tool front. I’ll even get to use my 30 tonne press for the first time to press the shaft out :D
 
I got delivered a front one by mistake, it came with the longer lead, obvs and all the grommets etc were wrong, and it needed the O ring as mentioned above.
But with a bit or jiggery pokery, the longer lead was threaded through and modified to fit and stay in place, with the O ring it fit fine, the bolts that came with the kit were too long so I reused the old ones.
To free off the hub I simply undid the four bolts a tiny bit then clouted them all on the back with a hammer, they freed off just fine, so the hub came off easy, no need for a press..
The problem you may find if you only have ordinary torque wrenches is the huge torque needed to tighten it up. Many of us have simply used body weight and maths on a long bar, to do it.
I did mine a couple of years ago and it has been fine since.
Not really a hard job at all compared to some on the Disco 2
Best of luck mate!:):):)
 
Stanleysteamer said:
I got delivered a front one by mistake, it came with the longer lead, obvs and all the grommets etc were wrong, and it needed the O ring as mentioned above.
But with a bit or jiggery pokery, the longer lead was threaded through and modified to fit and stay in place, with the O ring it fit fine, the bolts that came with the kit were too long so I reused the old ones.
To free off the hub I simply undid the four bolts a tiny bit then clouted them all on the back with a hammer, they freed off just fine, so the hub came off easy, no need for a press..
The problem you may find if you only have ordinary torque wrenches is the huge torque needed to tighten it up. Many of us have simply used body weight and maths on a long bar, to do it.
I did mine a couple of years ago and it has been fine since.
Not really a hard job at all compared to some on the Disco 2
Best of luck mate!:):):)
Click to expand...
Your right, I didn’t need my press :(
I tightened it up with my new DeWalt torque wrench though :) I put my long bar on it with a tube extension to test it and it wouldn’t budge. Lights out and job done.
 
You must log in or register to reply here.

Similar threads

NeoX
Problematic Discovery 2018 in the Netherlands
Replies
1
Views
422
brianp38dse
brianp38dse
new to all this
Discovery 2 1999 ES for sale East Sussex
Replies
17
Views
2K
new to all this
new to all this
H
Discovery Sport Sept 2015 - Breakdown
Replies
14
Views
2K
Phil-G
P
nevillen
An Honest RR Specialist
2
Replies
20
Views
2K
Datatek
Datatek
L
Odd suspension fault
Replies
9
Views
1K
Lezley
L
Back
Top