Twin Inlet instal
- Thread starter landy-lee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Mikalor hose clamps?
Yes. I have not had a problem with them yet.
Anaconda
Well-Known Member
- Posts
- 3,554
- Location
- Thames Valley
Looks good, you'll go like a rocket now!
I hope so!
All i have done to my engine is turned the fuel pin 2/3. I want to do one thing at a time and learn the differences as i go.
The next thing will be AlliSport intercooler.
D1Nut
Well-Known Member
- Posts
- 396
- Location
- South Africa
That allisport intercooler is going to make a big difference
is it the very big one or just the big one
is it the very big one or just the big one
Just the big one. I have an oil cooler for the R380 so i cant fit a full width.
Will keep you all posted!
RustyDefender
Well-Known Member
- Posts
- 567
- Location
- Lake District
the paint adds an extra 10hp 
- let us know how this performs
- let us know how this performs
D1Nut
Well-Known Member
- Posts
- 396
- Location
- South Africa
Mine is the same as that one
the only issue I had was that both inlet and outlet don't have a little raised lip like the original - so the silicone pipes in my case didn't want to seal nicely and a better set of hose clamps was required
the only issue I had was that both inlet and outlet don't have a little raised lip like the original - so the silicone pipes in my case didn't want to seal nicely and a better set of hose clamps was required
