Turbo actautor pipe
- Thread starter Riich
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomania
Well-Known Member
- Posts
- 6,947
Just buy a piece of air pipe! It's standard stuff.
discomania
Well-Known Member
- Posts
- 6,947
I would say so. It's designed for fuel so putting air through it will be fine and the pressure is pretty low 0.6 - 1.2 Bar depending if been messed with.
Last edited:
bluedog333
Well-Known Member
- Posts
- 5,442
- Location
- Henley on Thames, Oxfordshire
I've just done mine with some fuel pipe and it seems to work fine ( I think! ). You'll need at least 6" of pipe to prevent it kinking, as the proper part is shaped.
discomania
Well-Known Member
- Posts
- 6,947
While you are at it plumb it directly into your inlet manifold to get true manifold pressure!
discomania
Well-Known Member
- Posts
- 6,947
On some manifolds there is already a drilled hole on the back edge (facing bulkhead). Those that are not drilled have a thickened section suitable for drilling.
discomania
Well-Known Member
- Posts
- 6,947
15/32 if my mind serves me correctly, it's a fairly standard pipe fitting size so you can get a 15/32 to hose barb easily enough - if that is indeed the size!
