Tuning box

Roverron · May 15, 2006

outlander said:
yeah I should have tried that one (altho my work may well be soon running a fleet of 10 freebifters and then I will be going cap in hand to Ron)

With regards to ease of fitting Tash - once you have fitted one then it really is a piece of cake, if you are pretty dextrous then it can be done with no tools whatsoever - if not then 4 bolts

does it make a difference to performance??? - oh yes!!!!!!!!!

There's no need for me to comment....I can show you plenty of feedback like this!
You also get a 30day money back guarantee if you don't like it and a 2yr warranty.
It plugs in in a few minutes, and is equally quick to remove if you need to.
If you cliick the 'me' button on that Ebay page, there is a link to my TD4 page and Tu3 pages.
Cheers,
Ron

mondo · May 15, 2006

come on Ron, you aint got time to be chatting on here
looks like your going to be getting even busier! now toddle off back to the workshop theres a good lad

Roverron · May 15, 2006

mondo said:
come on Ron, you aint got time to be chatting on here
looks like your going to be getting even busier! now toddle off back to the workshop theres a good lad

I'm going, I'm going.
Just sent you an email as well - I must be ambidextrous..1

outlander · May 15, 2006

Roverron said:
I must be ambidextrous..1

I would give my right arm to be ambidextrous

mondo · May 15, 2006

outlander said:
I would give my right arm to be ambidextrous

Dose that mean you can w*nk with both hands?

outlander · May 15, 2006

mondo said:
Dose that mean you can w*nk with both hands?

surely you mean wink with both eyes????

mondo · May 15, 2006

outlander said:
surely you mean wink with both eyes????

Nope! I meant **** with both ( either ) Hand

TASH · May 22, 2006

Well bitten the bullet and gone for one of Roverron's boxes

.

Studied all the feedback and responses on here and just hope that it is as good as people say.

Ron is there any chance of some early instructions on how to fit, only thing that concerns me at the moment, is it simply a case of plug in, put the lid on, shut the bonnet, start the engine and away you go!

Roverron · May 22, 2006

TASH said:
Well bitten the bullet and gone for one of Roverron's boxes .

Studied all the feedback and responses on here and just hope that it is as good as people say.

Ron is there any chance of some early instructions on how to fit, only thing that concerns me at the moment, is it simply a case of plug in, put the lid on, shut the bonnet, start the engine and away you go!

Order received. Thanks.

I'll email you the instructions. Its dead easy to fit.

Cheers, Ron

mondo · May 22, 2006

TASH said:
Well bitten the bullet and gone for one of Roverron's boxes .

Studied all the feedback and responses on here and just hope that it is as good as people say.

Ron is there any chance of some early instructions on how to fit, only thing that concerns me at the moment, is it simply a case of plug in, put the lid on, shut the bonnet, start the engine and away you go!

Have no Fear Tash! There are a simple plug in job , One tip yer might find usefull tho, have a look where yer maf sensor is and set about the air filter box wi yer hacksaw

then put it back together. When the box turnes up you wont have the airbox to remove all over again cos yel be able to just plug it straight in.

You dont have to do any of the above.
I can just tell yer all excited and carnt wait TE HE

Just like xmas Innit

willo · May 22, 2006

As Ron is around I'll ask him same thing, is that MF75p just to plug in ?
A plug on the MAF and a socket where the original plug has to go ??
(Did you put it in the mail today pse ?)
Tnx.

mondo · May 22, 2006

willo said:
As Ron is around I'll ask him same thing, is that MF75p just to plug in ?
A plug on the MAF and a socket where the original plug has to go ??
(Did you put it in the mail today pse ?)
Tnx.

OOOOhhhhh I think Wills Excited as well!!

Hee Hee!

TASH · May 22, 2006

Hacksaw, chopping away at my new motor, heart was in my mouth for a bit there.

willo · May 23, 2006

mondo said:
OOOOhhhhh I think Wills Excited as well!! Hee Hee!

You can say that again mondo.

mondo · May 23, 2006

willo said:
You can say that again mondo.

Has it STILL not turned up yet Will?

Got mine last week

bellautos · May 23, 2006

Sorry to jump in

@ Ron can you please tell me where you got the "brade" you have put over the wires on your boxes ,, im needing some for a few projects.

Regards bell

TASH · May 24, 2006

Box has arrived.

Going to wait until friday to fit as I don't want any problems for when the wife goes to work in the freelander tomorrow. Very tempting to fit though!

willo · May 24, 2006

Hate to say but nothing shown up so far, and tomorrow thursday is an holiday here, so it will be (hope so at least) friday.

TASH · May 24, 2006

Willo

I ordered mine Monday night and it arrived this morning, so I would check with Ron on yours.

Ron

Very good service so far, as above waiting to try.

willo · May 25, 2006

Hi TASH,

Mine has to swim a lot before arriving here you know.

Tuning box

New Member

Banned

New Member

New Member

Banned

New Member

Banned

New Member

New Member

Banned

Well-Known Member

Banned

New Member

Well-Known Member

Banned

Active Member

New Member

Well-Known Member

New Member

Well-Known Member

Similar threads