Trying to replace the ball joint

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

LearningDiscos

New Member
Posts
3
Hi all,

Got a decent disco 2, td5 2003 recently, several of the seals / boots have gone so we’re working on replacing them. Currently working on getting the front LH suspension arm ball joints replaced, been able to break the upper joint but the lower one seems impossibly stuck! Tried getting it out with the pickle forks and heat which worked on the upper but the lower won’t budge. Short of cutting it off, anyone got any tips or tricks for getting it out? Gone through the tutorials online and they’re all saying it should come off with a bit of force.
 

Attachments

  • IMG_0299.jpeg
    IMG_0299.jpeg
    411.5 KB · Views: 108
  • IMG_0300.jpeg
    IMG_0300.jpeg
    330.4 KB · Views: 98
  • IMG_0301.jpeg
    IMG_0301.jpeg
    254.5 KB · Views: 105
Thank you, the nut is off and we’ve tried breaking the taper by hitting it but unfortunately that’s not worked either, we’ve tried the 25mm nuckle fork, tried using two hammers with one working as an anvil and tried heating it but it’s still not budging!
 
Last edited:
9 inch grinder with a cutting disc, just cut it off, then remove the stubs and the remains of the ball joints
 
Last edited:
You must log in or register to reply here.

Similar threads

H
MOT Failed
Replies
3
Views
1K
Datatek
Datatek
S
Series 3 ball joint connected to upper relay lever at end of steering tube wrong way up
Replies
4
Views
1K
tony109
tony109
N
P38 abs / traction fault.
Replies
4
Views
1K
Neil.ms
N
A
Help with front ball joint replacement.
Replies
6
Views
938
Abaddon
A
L
Worn out A-frame ball joint
2
Replies
24
Views
2K
Lamaine
L
Back
Top