Truck top
- Thread starter Berks4x4
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes it is one size fits all. Hold onto the seat belt bar. Do you have a canvass top? It's with the canvass tilt. If its original it's worth holding on to. The truck cab requiries it's own seat belt fixings. Original fittings may be unobtainable. Do you have a parts manual? All listed parts required are set out.
Thanks gents,
Yes it's an 88" with original tilt and frames which I will keep. I'd only consider fitting the truck top in the winter - and was thinking I could maybe alter the angle of the seat belt bar to fit inside the scope of the truck top - as it has no seat belt mountings.
Yes it's an 88" with original tilt and frames which I will keep. I'd only consider fitting the truck top in the winter - and was thinking I could maybe alter the angle of the seat belt bar to fit inside the scope of the truck top - as it has no seat belt mountings.
Remora107
Well-Known Member
- Posts
- 6,831
- Location
- South Shropshire
All Series ? Even Series One ? Or don't they count ?
jockmurray
Active Member
- Posts
- 117
i gaurantee it wont fit my 86 inch either series1 are different
The series 1 truck cab is unique to the series 1 as such I doubt there would be any confusion or need to ask would it fit a series 1. As most series 1 owners are also very particular on period correct parts I doubt someone would ask if the more common truck cab shape would fit a series 1 as it would quite obviously look out of place especially as a quick Google search shows a very flat truck fitted to series 1 and then series 2's onwards all looking rather similar. So to answer your question no a series 1 didn't count in this thread as common sense would dictate that a series 1 truck cab is completely different.
